ICALEO 2013 Paper #1902 ( Dependence of Cutting Carbon Fiber Reinforced Plastics with nanosecond Laser On The Laser Wavelength and Oxygen Concentration of the Air.)
Dependence of Cutting Carbon Fiber Reinforced Plastics with nanosecond Laser On The Laser Wavelength and Oxygen Concentration of the Air.
Authors:
Shin-Ichiro Masuno, Osaka Univ.; Ibaraki,Osaka Pref. Japan
Kenjiro Takahashi, Osaka Univ.; Ibaraki, Osaka Japan
Yuji Sato, Osaka Univ.; Ibaraki, Osaka Japan
Masahiro Tsukamoto, Osaka Univ.; Ibaraki, Osaka Japan
Kazuya Miyagawa, Osaka Univ.; Ibaraki, Osaka Japan
Kazuki Nakai, Osaka Univ.; Ibaraki, Osaka Japan
Tatsuya Nariyama, Kinki Univ.; Higashiosaka, Osaka Japan
Presented at ICALEO 2013
Carbon fiber reinforced plastic(CFRP) is complex material made of carbon fibers and m...$28.00
ICALEO 2013 Paper #1901 (High-Efficiency Laser Processing of CFRP)
High-Efficiency Laser Processing of CFRP
Authors:
Rudolf Weber, IFSW, University of Stuttgart; Stuttgart Germany
Volkher Onuseit, Ifsw, University of Stuttgart; Stuttgart
Simon Tscheulin, Ifsw, University of Stuttgart; Stuttgart
Thomas Graf, Ifsw, University of Stuttgart; Stuttgart
Markus Grafried, Ifsw, University of Stuttgart; Stuttgart
Presented at ICALEO 2013
Industrial large-volume application of CFRP requires efficient and high-quality processing. Laser processing of carbon fibres is very promising but highly energy consuming due to the large sublimation enthalpy of graphite. In contrast, the sublimation enthalpy of the embedding...$28.00
ICALEO 2013 Paper #1805 (Dissimilar Joining of Titanium Alloy Ti-6Al-4V to Aluminum Alloy 2024 Via Laser Welding)
Dissimilar Joining of Titanium Alloy Ti-6Al-4V to Aluminum Alloy 2024 Via Laser Welding
Authors:
Vittorio Alfieri, University of Salerno; Fisciano Italy
Fabrizia Caiazzo, University of Salerno; Fisciano Italy
Vincenzo Sergi, University of Salerno; Fisciano Italy
Presented at ICALEO 2013
Dissimilar joining of titanium to aluminum is required for several purposes in automotive and aerospace industries. Nevertheless, a number of issues arise due to their different properties, in terms of crystal micro structure, melting point, heat conductivity and coefficient of linear expansion. In addition, brittle intermetallic formation is induced at the interface, thus affecting the...$28.00
ICALEO 2013 Paper #1804 (Laser Processing of Thin Copper and Aluminium Thin Sheets with Green (532Nm) and Infrared (1064Nm) Pulsed Laser Beam Sources)
Laser Processing of Thin Copper and Aluminium Thin Sheets with Green (532Nm) and Infrared (1064Nm) Pulsed Laser Beam Sources
Authors:
Paola De Bono, TWI Ltd; Cambridge USA
Ioannis Metsios, TWI Ltd; Cambridge Great Britain
Jonathan Blackburn, TWI Ltd; Cambridge Great Britain
Paul Hilton, TWI Ltd; Cambridge Great Britain
Presented at ICALEO 2013
In this study processing of thin copper C101 (Cu C101) and aluminium 3003 (Al 3003) were investigated, using both infrared (IR), at 1064nm wavelength, and green, at 532nm wavelength, pulsed laser beam sources. The power density (peak power divided by the area of the minimum focused laser beam width) thresholds for ke...$28.00
ICALEO 2013 Paper #1803 (Effect of Process Parameters on the Weld Quality in Laser Welding of Az31B Magnesium Alloy in Lap Joint Configuration)
Effect of Process Parameters on the Weld Quality in Laser Welding of Az31B Magnesium Alloy in Lap Joint Configuration
Authors:
Masoud Harooni, Southern Methodist University-RCAM; Dallas TX USA
Radovan Kovacevic, Southern Methodist University; Dallas TX
Blair Carlson, GM Research Center; Warren MI
Presented at ICALEO 2013
Magnesium is the lightest structural metal; therefore, it has been used in different industries such as automotive, aerospace, electronics and defense. Among different joining processes, laser welding is highly efficient due to its low heat input, high depth-to-width ratio and good mechanical properties. A fiber laser is used to weld AZ31B magnesiu...$28.00
ICALEO 2013 Paper #1802 (Investigation on the Laser Welding Process of Tin Phosphor Bronze)
Investigation on the Laser Welding Process of Tin Phosphor Bronze
Authors:
Hui-chi Chen, Singapore Institute of Manufacturing Technology; Singapore Singapore
Guijun Bi, Singapore Institute of Manufacturing Technology; Singapore Singapore
Mui Ling Sharon Nai, Singapore Institute of Manufacturing Technology; Singapore Singapore
Jun Wei, Singapore Institute of Manufacturing Technology; Singapore Singapore
Presented at ICALEO 2013
Tin phosphor bronze is a tin-based copper alloy which is widely used in the electronics industry. It is being used in components such as computer and mobile connectors, lead frames, vibrating plates and terminals. Because of the high...$28.00
ICALEO 2013 Paper #1801 (Welding of Dissimilar Metallic Materials Using a Scanned Laser Beam)
Welding of Dissimilar Metallic Materials Using a Scanned Laser Beam
Authors:
Paola De Bono, Twi Ltd; Cambridge Great Britain
Paul Hilton, Twi Ltd; Cambridge Great Britain
Jonathan Blackburn, TWI Ltd; Cambridge Great Britain
Michael Gittos, TWI Ltd; Cambridge Great Britain
Sullivan Smith, Twi Ltd; Cambridge Great Britain
Presented at ICALEO 2013
For most dissimilar metal combinations, a key challenge which must be addressed for fusion joining processes is the chemical incompatibility of the metals, which typically leads to the formation of brittle intermetallic phases and, consequently, inadequate weld properties. To counteract this issue, a te...$28.00
ICALEO 2013 Paper #1706 (Experimental Analysis of Total Indicated Runout and Residual Stress of Laser Cladding Layer on"A Large-Scale Rotary Component")
Experimental Analysis of Total Indicated Runout and Residual Stress of Laser Cladding Layer on"A Large-Scale Rotary Component"
Authors:
Jianhua Yao, Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology; Hangzhou
Qunli Zhang, Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Shirui Guo, Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Haiming Lai, Hangzhou Steam Turbine Co.,Ltd; Hangzhou
Jianqiang Kong, Hangzhou Steam Turbine Co.,Ltd; Hangzhou$28.00
ICALEO 2013 Paper #1705 (Microstructure and Hardness of FeCrNiCoMn High-Entropy Alloy Coating Prepared by Laser Cladding With Pre-Alloyed Gas Atomized Powder)
Microstructure and Hardness of FeCrNiCoMn High-Entropy Alloy Coating Prepared by Laser Cladding With Pre-Alloyed Gas Atomized Powder
Authors:
Jianhua Yao, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Ziqing Weng, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Gang Dong, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Lijing Yang, Zhejiang University of Technology; Hangzhou Peoples Republic of China
Presented at ICALEO 2013
High-entropy alloy is the newly developed material which is composed at least five principal elements with concentrations in the range of 5~35 at.%. High-entropy alloy...$28.00
ICALEO 2013 Paper #1704 (Clad Height Control in Laser Cladding Using a Nonlinear Optimal Output Tracking Controller)
Clad Height Control in Laser Cladding Using a Nonlinear Optimal Output Tracking Controller
Authors:
Mohammad Farshidianfar, University of Waterloo; Waterloo USA
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Saeid Khosravani, University of Waterloo; Waterloo ON Canada
Adrian Gerlich, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2013
Laser cladding also known as laser powder deposition has proven to be one of the most efficient methods of metallic deposition in the industry. Due to its advantages, it is now being used in applications such as rapid prototyping, metallic coating and parts repair. Despite all the benefits provided...$28.00
Pages
There is currently no content classified with this term.