ICALEO 2013 Paper #2103 (Laser Welding of Fully Austenitic Twinning Induced Plasticity (Twip) Steels)
Laser Welding of Fully Austenitic Twinning Induced Plasticity (Twip) Steels
Authors:
Velten Behm, Volkswagen AG; Wolfsburg Germany
Stefan Huinink, Sitech Sitztechnik Gmbh; Wolfsburg Germany
Manuel Otto, Salzgitter Mannesmann Forschung GmbH; Salzgitter Germany
Matthias Hofemann, Salzgitter Mannesmann Forschung GmbH; Salzgitter Germany
Andre Springer, Laser Zentrum Hannover E.V.; Hannover Germany
Stefan Kaierle, Laser Zentrum Hannover E.V.; Hannover Germany
Presented at ICALEO 2013
One of the key disciplines in today’s automotive engineering is the ever-increasing need to design lighter cars in combination with an increased cr...$28.00
ICALEO 2013 Paper #2101 (Laser-Welded Sandwhich Floor for Marine Container)
Laser-Welded Sandwhich Floor for Marine Container
Authors:
Jukka Siltanen, Rautaruukki Oyj; Hämeenlinna Finland
Ville-Matti Nurmela, Ruukki Metals Oy; Uusikaupunki Finland
Ilpo Maaranen, Ruukki Metals Oy; Uusikaupunki Finland
Presented at ICALEO 2013
A new type of floor structure for marine containers utilizes both the excellent properties of wear-resistant and high-strength steels produced by Finnish steel maker Rautaruukki and the advantages of laser welding. Wear-resistant steel has excellent properties that protect it against wearing and impacts. The high-strength steel can carry heavy loads even with small material thicknesses. Laser welding as a low heat input w...$28.00
ICALEO 2013 Paper #204 (Lasers with Line Focus Geometries As Universal Tool for a Wide Range of Surface Processing Applications)
Lasers with Line Focus Geometries As Universal Tool for a Wide Range of Surface Processing Applications
Authors:
Jens Meinschien, LIMO Lissotschenko Mikrooptik GmbH; Dortmund USA
Lutz Aschke, Limo Lissotschenko Mikrooptik Gmbh; Dortmund
Mikhail Ivanenko, Limo Lissotschenko Mikrooptik Gmbh; Dortmund
Presented at ICALEO 2013
The herewith presented approaches are relevant for a large range of applications were surfaces or thin films are treated by scanning processes in large scale, e.g. photovoltaics, flat panel displays production, drying and annealing surfaces. Such laser systems can be implemented into inline-processes, and efficiently replace in some technologies ...$28.00
ICALEO 2013 Paper #201 (Cutting of Stainless Steel, Low Carbon Steel and Aluminum with Ultra-High Brightness 2 kW Direct Diode Laser)
Cutting of Stainless Steel, Low Carbon Steel and Aluminum with Ultra-High Brightness 2 kW Direct Diode Laser
Authors:
Jay Liebowitz, TeraDiode, Inc.; Littleton MA USA
Narasimhan Sreenivassan, Teradiode Inc; Wilmington MA USA
Michael Deutsch, Teradiode Inc.; Wilmington MA USA
Bien Chann, Teradiode Inc; Wilmington MA USA
Parviz Tayebati, Teradiode Inc.; Wilmington MA USA
James Burgess, Teradiode Inc.; Wilmington MA USA
Chris Haskell, Teradiode Inc.; Wilmington MA USA
Presented at ICALEO 2013
TeraDiode presents results of metal cutting with its 970 nm Wavelength Beam Combined (WBC) fiber-coupled, high brightness direct d...$28.00
ICALEO 2013 Paper #2009 (Microstructure of Mcraly Coatings on Steel Substrates)
Microstructure of Mcraly Coatings on Steel Substrates
Authors:
Armando Yanez, Universidade da Coruna; Ferrol Spain
Jose M. Amado, Universidade Da CoruñA; Ferrol Spain
Vicente Amigo, Universidad PolitéCnica De Valencia; Valencia Spain
MaríA J. Tobar, Universidade Da CoruñA; Ferrol Spain
Javier N. Montero, Universidade Da CoruñA; Ferrol Spain
Presented at ICALEO 2013
MCrAlY alloys (where M stands for Ni,Co or both) are commonly used as overlay protective coatings in gas turbine engine components against high temperature oxidation and corrosion. The protective effect of these alloys is due to the formation of a continuous thermally stable ox...$28.00
ICALEO 2013 Paper #2008 (System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems)
System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems
Authors:
Mohammad Farshidianfar, University of Waterloo; Waterloo USA
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Meysar Zeinali, University of Laurentian; Sudbury ON Canada
Adrian Gerlich, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2013
Laser cladding is an emerging technology which has recently received a significant attention by researchers due to its promising manufacturing features. A complicated object can be fabricated directly from a CAD model by means of a layer-by-layer manufacturing using this technique. In m...$28.00
ICALEO 2013 Paper #2006 (The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process)
The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process
Authors:
Jonne Nakki, Tampere University of Technology; Kokkola Finland
Henri Pajukoski, Tampere University of Technology; Tampere Finland
Jari Tuominen, Tampere University of Technology; Tampere Finland
Petri Vuoristo, Tampere University of Technology; Tampere Finland
Presented at ICALEO 2013
Hot cracking sensitivity of some commercially available alloy 625 powders in laser cladding has been studied. Based on the previous studies on total of 11 powders from different manufacturers, some follow-up tests with powders that had varying amounts of additional alloying or impurity e...$28.00
ICALEO 2013 Paper #2002 (Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80)
Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80
Authors:
Heng Zhao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Dongyun Zhang, Beijing University of Technology; BeiJing USA
Zhibo Li, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Xuanyang Cao, Institute of Laser Engineering, Beijing University of Technonogy; Beijing Peoples Republic of China
Tiechuan Zuo, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2013
Rene 80 is a nickel-bas...$28.00
ICALEO 2013 Paper #2001 (Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability)
Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability
Authors:
Joonas Pekkarinen, Lappeenranta University of Technology; Turku Finland
Antti Salminen, Lappeenranta University of Technology; Lappeenranta Finland
Veli Kujanpaaa, Vtt Technical Research Centre of Finland; Lappeenranta Finland
Jarmo Ilonen, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
Lasse Lensu, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
Heikki Kalviainen, Lappeenranta University of Te...$28.00
ICALEO 2013 Paper #1909 (The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint)
The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint
Authors:
Xianghu Tan, Tsinghua University; Beijing Peoples Republic of China
Zhang Jing, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
Shan Jiguo, Tsinghua University; Beijing Peoples Republic of China
Shanglu Yang, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
Ren Jialie, Tsinghua University; Beijing Peoples Republic of China
Presented at ICALEO 2013
The reliable joining of carbon fiber reinforced polymer (CFRP) and metal is the key problem to its widespread ...$28.00
Pages
There is currently no content classified with this term.