ICALEO 2009 Paper #507 (New Analysis on Laser-induced Damage Mechnism of CCD Device)
New Analysis on Laser-induced Damage Mechnism of CCD Device
Authors:
Jingjing Dai, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Zhiyong Wang, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
Presented at ICALEO 2009
CCD (Charge Coupled Devices )is a solid-state TV camera tube which is widely used in many fields for its high nicety and sensitivity. However, just because of its high sensitivity to light, it is easily disturbed or damaged by laser. The research on laser inducing effect to CCD is of a great significance. Now the researches on the damage of CCD are focused on the po...$28.00
ICALEO 2009 Paper #508 (Nano WC Powder Cold Enhancing of Light Metal Surface by Laser Shock Peening Process)
Nano WC Powder Cold Enhancing of Light Metal Surface by Laser Shock Peening Process
Authors:
Renjie Zhu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
Liang Lv, -; -
Changsheng Dong, -; -
Wenjin Liu, -; -
Presented at ICALEO 2009
Light metal alloys are nowadays widely used as structure materials in aerospace, transportation and electronic industries due to their good strength and light weight. One of the issues is their poor surface hardness resulting in poor wear resistance and shorter life time. Many efforts have been made to hard...$28.00
ICALEO 2009 Paper #509 (Investigation on the Electrochemical Catalysis Properties of NI-Decorated Nanoporous Copper Formed by Hybrid Laser Deposition)
Investigation on the Electrochemical Catalysis Properties of NI-Decorated Nanoporous Copper Formed by Hybrid Laser Deposition
Authors:
Yu Gu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
Mingxing Ma, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
Wenjin Liu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
Changsheng Dong, -; -
Yide Kan, -; -
Presented at ICALEO 2009
Nano-alloys or nano-structure often display novel physical, chemical and mech...$28.00
ICALEO 2009 Paper #601 (Scaling Laws for the Reactive-Gas Laser Cutting of Thick Steel Sheets)
Scaling Laws for the Reactive-Gas Laser Cutting of Thick Steel Sheets
Authors:
Anatoly Orishich, Institute of Theoretical and Applied Mechanics, Russian Academy of Sciences, Sib; Novosibirsk Russia
Alexandr Malikov, Itpm Sb Ras; Novosibirsk Russia
Victor Shulyatyev, Itpm Sb Ras; Novosibirsk Russia
Presented at ICALEO 2009
In spite of many investigations, modern theoretical models do not allow to predict the optimum modes of the laser cutting from the viewpoint of the minimum roughness. This is particularly important for thick sheets. In the present paper, for the case of low-carbon steel of 5 25 mm thick, we defined experimentally the parameter range at which the cu...$28.00
ICALEO 2009 Paper #602 (Effects of Internal Design Geometry in De Laval Nozzles for Off-Axis Assist Gas Injection on Inert-Gas Laser Cutting Performance)
Effects of Internal Design Geometry in De Laval Nozzles for Off-Axis Assist Gas Injection on Inert-Gas Laser Cutting Performance
Authors:
Antonio Riveiro, Universidade De Vigo; Vigo Spain
Felix Quintero, Universidade De Vigo; Vigo Spain
Rafael Comesana, Universidade De Vigo; Vigo Spain
Jesus Del Val, Universidade De Vigo; Vigo Spain
Mohamed Boutinguiza, Universidade De Vigo; Vigo Spain
Fernando Lusquinos, Universidade De Vigo; Vigo Spain
Juan Pou, Universidade De Vigo; Vigo Spain
Presented at ICALEO 2009
The aerodynamic interactions of the assist gas during fusion laser cutting are an essential parameter determining c...$28.00
ICALEO 2009 Paper #605 (Fiber Laser Orbital Cutting of Stainless Steel Tubes)
Fiber Laser Orbital Cutting of Stainless Steel Tubes
Authors:
Tuomas Purtonen, Lappeenranta University of Technology; Lappeenranta Finland
Antti Salminen, -; -
Presented at ICALEO 2009
Fiber laser cutting of metallic materials has been studied in numerous occasions for the past few years. Most of the research done in this field has been focused on one or two-dimensional vertical cutting of sheet metals. Different industrial aspects have shown an increasing interest in laser cutting of pipes. Conventional CO2-laser laser pipe cutting machines can not fulfill the requirements set for some applications. Some applications of pipe cutting are such that vertical cutting positions can n...$28.00
ICALEO 2009 Paper #607 (Fiber Laser Blanking of Coil Strips at Extreme Speed-Extreme-Power)
Fiber Laser Blanking of Coil Strips at Extreme Speed-Extreme-Power
Authors:
Charles Caristan, Air Liquide Industrial U.S. LP; Houston TX USA
Jay Finn, Automatic Feed Inc.; Napoleon OH USA
Presented at ICALEO 2009
Fiber lasers for flat bed laser cutting systems open new niche applications where users can take advantage of their high wall-plug to beam output energy efficiency, low maintenance burden, and a leaner manufacturing approach with the elimination of external beam alignment needs for set-up. The increase in output power of fiber lasers also call for the right choice in methods and machines. This paper presents developments of special optics and methods at extreme speed ext...$28.00
ICALEO 2009 Paper #608 (Opportunities to Enlarge the Application Area of Remote - Cutting)
Opportunities to Enlarge the Application Area of Remote - Cutting
Authors:
Matthias Lutke, University of Technology Dresden; Dresden Germany
Thomas Himmer, Fraunhofer Iws; Dresden Germany
Andreas Wetzig, Fraunhofer Iws; Dresden Germany
Eckhard Beyer, Fraunhofer Iws; Dresden Germany
Presented at ICALEO 2009
Remote-cutting is an alternative method to conventional laser cutting processes when working on thin sheets. Going without any cutting gas the inertia can be reduced significantly. Deflected by two mirrors the laser beam becomes more flexible in the working envelope of the scanner. Depending on the sheet thickness cutting speeds of about 100 m/min in con...$28.00
ICALEO 2009 Paper #609 (Advanced Remote Cutting of Non-Metal Webs and Sheets)
Advanced Remote Cutting of Non-Metal Webs and Sheets
Authors:
Annett Klotzbach, Fraunhofer Institute Material and Beam Technology Dresden; Dresden Germany
Matthias Lutke, Technical University Dresden; Dresden Germany
Andreas Wetzig, Fraunhofer Institute Material and Beam Technology Dresden; Dresden Germany
Eckhard Beyer, Technical University Dresden; Dresden Germany
Presented at ICALEO 2009
Remote processing is known as a new trend to increase productivity of manufacturing processes. Even cutting of non - metals is a large area of potential Remote laser applications. The advantages of high speed and accurate cutting without any proccessing gas enable the c...$28.00
ICALEO 2009 Paper #610 (Macro and Micro Applications for Fibre Lasers in Laser Material Processing of Aerospace Composite Material)
Macro and Micro Applications for Fibre Lasers in Laser Material Processing of Aerospace Composite Material
Authors:
Paul French, Liverpool John Moores University; Liverpool Great Britain
Mo Naeem, Gsi Group; Rugby Great Britain
Emily Leach, Wirral Grammer School for Girls; Wirral Great Britain
John Clowes, Fianium Ltd; Southampton Great Britain
Martin Sharp, Liverpool John Moores University; Liverpool Great Britain
Presented at ICALEO 2009
The aerospace industry is showing an increased interest in composite materials. The A380, A350XWB and the Boeing 787 are using or plan to use a large percentage of composite material in their construction. ...$28.00