ICALEO 2008 Paper #M108 (Utilization of 515 nm Pulsed Fiber Laser for Low Temperature Nanoparticle Sintering)
Utilization of 515 nm Pulsed Fiber Laser for Low Temperature Nanoparticle Sintering
Authors:
Jussi Pekkanen, Tampere University of Technology - Department of Electronics; Tampere Finland
Tero Kumpulainen, Tampere University of Technology - Department of Production Engineering; Tampere Finland
Presented at ICALEO 2008
Printed electronics is a promising new technology to produce low-cost electronics. Electronic devices can be printed using nano-scale metal particle inks, which can revolutionize the electronics industry in a near future. Due to a small particle size metallic nanoparticles can be sintered to homogeneous electrically conductive traces at rather feasible temperatures e.g...$28.00
ICALEO 2008 Paper #M1101 (A Detailed Study of the Mechanism of Rapid Laser Patterning of Indium Tin Oxide Thin Films)
A Detailed Study of the Mechanism of Rapid Laser Patterning of Indium Tin Oxide Thin Films
Authors:
Paul M. Harrison, Powerlase Ltd; Crawley Great Britain
Nick Hay, Powerlase Ltd; Crawley Great Britain
Duncan Hand, Heriot-Watt University; Edinburgh Great Britain
Jozef Wendland, Heriot Watt University; Edinburgh Great Britain
Presented at ICALEO 2008
The process of rapid laser patterning (RLP) of ITO thin films on glass has been adopted into mass production by the flat panel displays industry. This process involves high speed selective removal of thin films for the manufacture of transparent electrode structures and uses high average power, high peak pow...$28.00
ICALEO 2008 Paper #M1102 (Control of the Removal Rate in Laser Chemical Machining)
Control of the Removal Rate in Laser Chemical Machining
Authors:
Andreas Stephen, Bias Gmbh; Bremen Germany
Ralf Walther, Bias Gmbh; Bremen Germany
Frank Vollertsen, Bias Gmbh; Bremen Germany
Presented at ICALEO 2008
An important challenge for all processes based on laser material removal is the control of the precision of the shape. This is so, because all methods are non-contact methods and the removal rate underlies certain influences depending on the exact processing conditions and material properties, making only limited prediction and control of the removal rate possible. In laser chemical machining the radiation locally initiates on a metal surface a thermochemi...$28.00
ICALEO 2008 Paper #M1103 (Applications of Short Pulsed Uv Lasers)
Applications of Short Pulsed Uv Lasers
Authors:
Igor Shklyar, J.P.Sercel Associates, Inc.; Manchester NH USA
Marco Mendes, J P Sercel Associates, Inc.; Manchester NH USA
Cristian Porneala, J P Sercel Associates, Inc.; Manchester NH USA
Jie Fu, J P Sercel Associates, Inc.; Manchester NH USA
Xiangyang Song, J P Sercel Associates, Inc.; Manchester NH USA
Jeff Sercel, J. P. Sercel Associates, Inc.; Manchester NH USA
Presented at ICALEO 2008
Excimer and UV diode-pumped solid-state (DPSS) lasers are both robust, production-capable systems used in a wide range of applications in microfabrication, surface treatment and materials processin...$28.00
ICALEO 2008 Paper #M1104 (Short-Pulse Lasers with the High Power and Repetition Rate for Microfabrication)
Short-Pulse Lasers with the High Power and Repetition Rate for Microfabrication
Authors:
Mikhail Grishin, Ekspla Uab; Vilnius Lithuania
Saulius Jacinavicius, Ekspla Uab; Vilnius Lithuania
Gediminas Raciukaitis, Institute of Physics; Vilnius Lithuania
Giedrius Andriukaitis, Ekspla Uab; Vilnius Lithuania
Marijus Brikas, Institute of Physics; Vilnius Lithuania
Presented at ICALEO 2008
Employment of short-pulse lasers in microfabrication opens a lot of opportunities in tailoring and shaping variety of materials. The main drawback in wide use of the laser technology in micro- and nanoscale today is the low fabrication speed. An increase in the pul...$28.00
ICALEO 2008 Paper #M1105 (Inside Process of Glass with Nanosecond Pulsed Laser)
Inside Process of Glass with Nanosecond Pulsed Laser
Authors:
Takeji Arai, Chuo University; Tokyo Japan
Noritaka Asano, Chuo University; Tokyo Japan
Akihiko Minami, Coherent Japan Inc.; Tokyo Japan
Hideaki Kusano, Shimadzu Corp.; Tokyo Japan
Presented at ICALEO 2008
Glass is a useful material. Recently, the utility of the inside processing of the glass with the laser came to be recognized. The glass is heterogeneous as processing materials with the laser. When heat occurred in the inside of the glass, the crack occurs in a random course, and a phenomenon is complicated. In addition, in the case of inside processing with the laser, the mechanism is very pec...$28.00
ICALEO 2008 Paper #M1202 (Nano-, Pico- and Femtosecond Laser Machining of Bioabsorbable Polymers and Biomedical Composites)
Nano-, Pico- and Femtosecond Laser Machining of Bioabsorbable Polymers and Biomedical Composites
Authors:
Assi Huttunen, Tampere University of Technology; Tampere Finland
Claire O'Connell, National University of Ireland; Galway Ireland
Gareth Williams, National University of Ireland; Galway Ireland
Petri Laakso, VTT Technical Research Centre of Finland; Lappeenranta Finland
Henna Niiranen, Tampere University of Technology; Tampere Finland
Mikko Huttunen, Tampere University of Technology; Tampere Finland
Richard Sherlock, National University of Ireland; Galway Ireland
Ville Ellä, Tampere University of Technology; Tampere F...$28.00
ICALEO 2008 Paper #M1205 (Direct Laser Deposited Titanium with Controlled Porosity for Bone Tissue Engineering)
Direct Laser Deposited Titanium with Controlled Porosity for Bone Tissue Engineering
Authors:
Andrew J Pinkerton, The University of Manchester; Manchester Great Britain
Christ P Paul, Raja Ramanna Centre for Advanced Technology; Indore 452013 (M.P) India
Mehrdad Iravani-Tabrizipour, University of Waterloo; Waterloo ON Canada
L M Kukreja, Raja Ramanna Centre for Advanced Technology; Indore 452013 (M.P) India
Amir Khajepour, University of Waterloo; Waterloo ON Canada
Presented at ICALEO 2008
The potential of engineered porous materials for aiding the osseointegration of metallic dental and orthopedic implants is well established. A range of tec...$28.00
ICALEO 2008 Paper #M201 (Influence of High-Power CW Fibre Laser Radiation (Single-mode) on Plasma Formation)
Influence of High-Power CW Fibre Laser Radiation (Single-mode) on Plasma Formation
Authors:
Marc Baumeister, Laser Centre, Muenster University of Applied Sciences; Steinfurt Germany
Tobias Scholz, Laser Centre, Muenster University of Applied Sciences; Steinfurt Germany
Klaus Dickmann, Laser Centre, Muenster University of Applied Sciences; Steinfurt Germany
Presented at ICALEO 2008
Recent advances in the field of highly brilliant continuous wave fibre laser sources lead to an increase of intensity. These intensities were formerly reserved to short pulse laser sources with pulse durations of several nanoseconds. As a result of this combination of wavelength, intensity an...$28.00
ICALEO 2008 Paper #M202 (Optical Emission Spectroscopy Study of Resonant Vibrational Excitation of Precursor Molecules in the CO2 Laser-Assisted Flame Deposition of Diamond)
Optical Emission Spectroscopy Study of Resonant Vibrational Excitation of Precursor Molecules in the CO2 Laser-Assisted Flame Deposition of Diamond
Authors:
H. Ling, University of Nebraska-Lincoln; Lincoln NE USA
T. Gebre, University of Nebraska-Lincoln; Lincolnq NE USA
Y.X. Han, University of Nebraska-Lincoln; Lincoln NE USA
Z.Q. Xie, University of Nebraska-Lincoln; Lincoln NE USA
X.K. Shen, University of Nebraska-Lincoln; Lincoln NE USA
Y.F. Lu, University of Nebraska-Lincoln; Lincoln NE USA
Presented at ICALEO 2008
Diamond thin films were deposited using C2H2/O2, C2H4/C2H2/O2, and C3H6/O2 combustion flames. At points where the ...$28.00