ICALEO 2010 Paper #M1106 (Depth Selective Laser Scribing of Thin-Film Silicon Solar Cells on Foil)
Depth Selective Laser Scribing of Thin-Film Silicon Solar Cells on Foil
Authors:
Laurie Wipliez, Energy Research Center of the Netherlands; Petten Netherlands
Jochen Löffler, Energy Research Center of The Netherlands; Petten Netherlands
Martijn De Keijzer, Energy Research Center of the Netherlands; Petten Netherlands
Wim Soppe, Energy Research Center of the Netherlands; Petten Netherlands
Thomas Sebastien, Energy Research Center of the Netherlands; Petten Netherlands
Aart Schoonderbeek, Laser Zentrum Hannover E.V.; Hannover Germany
Oliver Haupt, Laser Zentrum Hannover E.V.; Hannover Germany
Uwe Stute, Laser Zentrum Hannov...$28.00
ICALEO 2010 Paper #M1202 (Micropillar Fabrication on Bovine Cortical Bone by Direct Write Femtosecond Laser Ablation)
Micropillar Fabrication on Bovine Cortical Bone by Direct Write Femtosecond Laser Ablation
Authors:
Y. C. Lim, Laboratory for Multiscale Processing and Characterization, The Ohio State University; Columbus OH
K. Altman, Laboratory for Multiscale Processing and Characterization, The Ohio State University; Columbus OH
Dave Farson, Laboratory for Multiscale Processing and Characterization, The Ohio State University / Center for Affordable Nanoengineering of Polymeric Biomedical Devices, The Ohio State University; Columbus OH USA
K. M. Flores, Department of Material Science Engineering, The Ohio State University; Columbus OH USA
Presented at ICALEO 2010
This...$28.00
ICALEO 2010 Paper #M1203 (Optical Micro/Nanopatterning on Curved Ti Surfaces by Transported, Flexible Micro-Particle Lens Array)
Optical Micro/Nanopatterning on Curved Ti Surfaces by Transported, Flexible Micro-Particle Lens Array
Authors:
Ashfaq Khan, Laser Processing Research Centre School of Mechanical, Aerospace and Civil Engineering. The University of Manchester; Manchester Great Britain
Zengbo Wang, Laser Processing Research Centre School of Mechanical, Aerospace and Civil Engineering. The University of Manchester; Manchester Great Britain
Mohammad A. Sheikh, Laser Processing Research Centre School of Mechanical, Aerospace and Civil Engineering. The University of Manchester; Manchester Great Britain
David J. Whitehead, Laser Processing Research Centre School of Mechanical, Aerospace and Civil E...$28.00
ICALEO 2010 Paper #M1204 (Metal and Stent Cutting using Water Jet-Guided Laser Technology)
Metal and Stent Cutting using Water Jet-Guided Laser Technology
Authors:
A. Pauchard, Synova SA; Ecublens
M. Gobet, Synova SA; Ecublens Switzerland
F. Juvet, Synova SA; Ecublens
A. Schreiner, Synova USA; Fremont
Presented at ICALEO 2010
The water jet-guided laser technology has found a broad range of applications in the micromachining field. Its principle is to focus a laser beam into a hair-thin, low-pressure water jet, onto the sample. This hybrid system prevents heat damage to the material by cooling the cutting edges in between the laser pulses; simultaneously the water jet removes the laser generated molten material. Contamination is avoided thanks...$28.00
ICALEO 2010 Paper #M1205 (CO2 Whole Area Irradiative Processing and Patterning of Nylon 6,6 and the Effects Thereof on Osteoblast Cell Response in Relation to Wettability)
CO2 Whole Area Irradiative Processing and Patterning of Nylon 6,6 and the Effects Thereof on Osteoblast Cell Response in Relation to Wettability
Authors:
David Waugh, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University; Loughborough Great Britain
Jonathan Lawrence, Lincoln School of Engineering, University of Lincoln; Linkon Great Britain
Presented at ICALEO 2010
It has previously been shown that CO2 laser patterning of nylon 6,6 can modify its wettability characteristics, resulting in the material becoming more biomimetic. This paper discusses comparatively the differences between using a CO2 laser for surface patterning and large area processing an...$28.00
ICALEO 2010 Paper #M1206 (Using UV Laser Surface Treatment to Modify the Wettability Characteristics of Polyamide 6,6 and Its Effects on Osteoblast Cell Activity)
Using UV Laser Surface Treatment to Modify the Wettability Characteristics of Polyamide 6,6 and Its Effects on Osteoblast Cell Activity
Authors:
David Waugh, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University; Loughborough Great Britain
Jonathan Lawrence, Lincoln School of Engineering, University of Lincoln; Lincoln Great Britain
Presented at ICALEO 2010
Lasers can be used to modify the surface characteristics of a number of different materials for many applications. This paper details the way in which a KrF 248 nm excimer laser can be utilized to surface pattern and whole area irradiate nylon 6,6. 50 and 100 µm dimensioned trench and hatch pattern...$28.00
ICALEO 2010 Paper #M1207 (Patterning of Magnesium with Silver Nanoparticles using Laser Assisted Direct Writing)
Patterning of Magnesium with Silver Nanoparticles using Laser Assisted Direct Writing
Authors:
Ehsan Toyserkani, University of Waterloo, Department of Mechanical and Mechatronics Engineering; Waterloo ON Canada
Hamidreza Alemohamad, University of Waterloo, Department of Mechanical and Mechatronics Engineering; Waterloo ON Canada
Ehsan Foroozmehr, University of Waterloo, Department of Mechanical and Mechatronics Engineering; Waterloo ON Canada
Shahrzad Esmaeili, University of Waterloo, Department of Mechanical and Mechatronics Engineering; Waterloo ON Canada
Presented at ICALEO 2010
Surface patterning of biodegradable materials such as magnesium can improve...$28.00
ICALEO 2010 Paper #M1208 (Comparison of Dry and Wet Fibre Laser Precision Cutting for Coronary Stent Manufacture)
Comparison of Dry and Wet Fibre Laser Precision Cutting for Coronary Stent Manufacture
Authors:
N. Muhammad, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; - Great Britain
D. Whitehead, Laser Processing Research Centre, School of Mechanical Aerospace and Civil Engineering, The University of Manchester; - Great Britain
A. Boor, Swisstec AG; Schaan Austria
L. Li, Laser Processing Research Centre, School of Mechanical Aerospace and Civil Engineering, The University of Manchester; - Great Britain
Presented at ICALEO 2010
High precision laser micromachining is extensively used in medical de...$28.00
ICALEO 2010 Paper #M1301 (Refractive Field Mapping Beam Shaping Optics: Important Features for a Right Choice)
Refractive Field Mapping Beam Shaping Optics: Important Features for a Right Choice
Authors:
Alexander Laskin, Molecular Technology (MolTech) GmbH; Berlin Germany
Vadim Laskin, Molecular Technology (Moltech) Gmbh; Berlin Germany
Presented at ICALEO 2010
There are different kinds of refractive beam shapers of field mapping type used to transform the laser intensity distribution in order to get improvements or special effects in various laser technologies like welding, cladding, hardening, laser techniques in photovoltaics, etc. A right choice of a suitable beam shaper depends on physical specifications of a particular laser application. As a rule, when a final laser spot size is ord...$28.00
ICALEO 2010 Paper #M1302 (Femtosecond Laser Ablation of Indium Tin Oxide (ITO) Glass for Fabrication of Thin Film Solar Cells )
Femtosecond Laser Ablation of Indium Tin Oxide (ITO) Glass for Fabrication of Thin Film Solar Cells
Authors:
Q. Bian, Kansas State University; Manhattan KS USA
X. Shen, Kansas State University; Manhattan KS USA
S. Chen, Kansas State University; Manhattan KS USA
Z. Chang, Kansas State University; Manhattan KS USA
S. Lei, Kansas State University; Manhattan KS USA
Presented at ICALEO 2010
Transparent conductive oxide (TCO) film on glass substrate has been widely used for making thin film solar cells and organic solar cells. Its important to scribe transparent oxide (TCO) film in order to fabricate different types of thin film solar cells. Her...$28.00