ICALEO 2010 Paper #M1004 (Femtosecond Laser Machining of SiO2 Microfluidic Devices for Cellular Imaging during Chemotaxis Analysis)
Femtosecond Laser Machining of SiO2 Microfluidic Devices for Cellular Imaging during Chemotaxis Analysis
Authors:
L. Costa, Center for Laser Applications, University of Tennessee Space Institute; Tullahoma TN USA
A. Terekhov, Center for Laser Applications, University of Tennessee Space Institute; Tullahoma TN USA
W. Hofmeister, Center for Laser Applications, University of Tennessee Space Institute; Tullahoma TN USA
D. Rajput, Center for Laser Applications, University of Tennessee Space Institute; Tullahoma TN USA
K. Lansford, Center for Laser Applications, University of Tennessee Space Institute; Tullahoma TN USA
D. Jowhar, Department of Biological...$28.00
ICALEO 2010 Paper #M1005 (Picosecond Laser-Induced Color Centers in Glass Optics)
Picosecond Laser-Induced Color Centers in Glass Optics
Authors:
David Ashkenasi, Laser- and Medical- Technology Berlin GmbH (LMTB), Applied Laser Technology; Berlin Germany
Andreas Lemke, Laser- and Medizin-Technologie Berlin Gmbh (LMTB), Applied Laser Technology; Berlin Germany
Presented at ICALEO 2010
It is known that ionizing radiation (X-ray, gamma rays, electrons) can induce numerous changes in the physical properties of glasses. The most obvious effect is visible coloration, which is caused by the accumulation of color centres (defects) in the irradiated volume. The application of these induced colour centres has prompted a renewed interest since these can be generated and bl...$28.00
ICALEO 2010 Paper #M101 (Processing of Dielectric Materials and Metals with ps Laserpulses)
Processing of Dielectric Materials and Metals with ps Laserpulses
Authors:
Beat Neuenschwander, Bern University of Applied Sciences Engineering and Information Technologies; Burgdorf Switzerland
Guido F. Bucher, Bern University of Applied Sciences Engineering and Information Technologies; Burgdorf Switzerland
Guido Hennig, Datwyler Graphics; Bleienbach Switzerland
Christian Nussbaum, Bern University of Applied Sciences Engineering and Information Technologies; Burgdorf Switzerland
Benjamin Joss, Bern University of Applied Sciences Engineering and Information Technologies; Burgdorf Switzerland
Martin Muralt, Bern University of Applied Sciences Engin...$28.00
ICALEO 2010 Paper #M102 (Critical Performance Aspects of Ultrashort Pulse Laser Materials Processing at High Repetition Rates and Average Powers (Invited Presentation))
Critical Performance Aspects of Ultrashort Pulse Laser Materials Processing at High Repetition Rates and Average Powers (Invited Presentation)
Authors:
Antonio Ancona, CNR-IFN; Bari Italy
Sven Döring, Friedrich-Schiller-University Jena; Jena Germany
Steffen Hädrich, Friedrich-Schiller-University Jena; Jena Germany
Jens Limpert, Friedrich-Schiller-University Jena; Jena Germany
Stefan Nolte, Friedrich-Schiller-University Jena; Jena Germany
Andreas Tünnermann, Fraunhofer Institute for Applied Optics and Precision Engineering IOF; Jena Germany
Presented at ICALEO 2010
An experimental investigation is presented on the ultrashort pul...$28.00
ICALEO 2010 Paper #M104 (Effect of Process Strategies on Thermal Load during CFRP Manufacturing using Picosecond Laser Pulses)
Effect of Process Strategies on Thermal Load during CFRP Manufacturing using Picosecond Laser Pulses
Authors:
Alexander Wolynski, GSaME / IFSW; Stuttgart Germany
Hatim Haloui, Lumera Laser GmbH; Kaiserslautern Germany
Patrick Mucha, IFSW; Stuttgart Germany
Andreas Gleiter, IKT; Stuttgart Germany
Paul French, GERI, Liverpool John Moores University; Liverpool Great Britain
Rudolf Weber, IFSW; Stuttgart Germany
Thomas Graf, IFSW; Stuttgart Germany
Presented at ICALEO 2010
Today, new functional materials like carbon fibre reinforced plastics (CFRPs) are finding their way into mass markets. As CFRPs offer outstanding mecha...$28.00
ICALEO 2010 Paper #M105 (Laser Micromachining of CFRP by Ultra-Short Pulse Lasers)
Laser Micromachining of CFRP by Ultra-Short Pulse Lasers
Authors:
Masayuki Fujita, Institute for Laser Technology; Osaka Japan
Toshihiro Somekawa, Institute for Laser Technology; Suita Japan
Takumi Ozaki, Kinki University; Higashiosaka Japan
Minoru Yoshida, Kinki University; Higashiosaka Japan
Noriaki Miyanaga, Osaka University; Suita, Osaka Japan
Yutaka Mitooka, Industrial Technology Center of Okayama Prefecture; Okayama Japan
Kazuhisa Mikame, Laserx Co.,Ltd.; Chiryu Japan
Hideyasu Shamoto, Laserx Co.,Ltd.; Chiryu Japan
Presented at ICALEO 2010
CFRP (Carbon Fiber-Reinforced Plastic), which is a composite...$28.00
ICALEO 2010 Paper #M1101 (Beam Delivery Techniques for Laser Fired Contacts)
Beam Delivery Techniques for Laser Fired Contacts
Authors:
Zhenyan Hua, Applied Research Laboratory, Pennsylvania State University; State College PA USA
Edward Reutzel, Applied Research Laboratory, Pennsylvania State University; State College PA USA
Lian Zou, Bp Solar; Frederick MD USA
Presented at ICALEO 2010
Laser Fired Contact (LFC) is a contact through the dielectric layer between the silicon wafer and back-side conductor layer produced by a laser-based technique. Such technique holds promise to dramatically reduce the overall manufacturing cost of silicon based solar cells. In an effort to investigate and optimize LFC beam delivery system, two different beam sp...$28.00
ICALEO 2010 Paper #M1102 (Process Optimization for Improving Drilling Efficiency in EWT Solar Cell Manufacturing)
Process Optimization for Improving Drilling Efficiency in EWT Solar Cell Manufacturing
Authors:
Henrikki Pantsar, Fraunhofer USA, Inc., Center for Laser Technology; Plymouth MI USA
Mathew Rekow, Pyrophotonics Lasers, Inc.; Dollard-Des-Ormeaux QC Canada
Richard Murison, Pyrophotonics Lasers, Inc.; Dollard-Des-Ormeaux QC Canada
Hans Herfurth, Fraunhofer USA, Inc., Center for Laser Technology; Plymouth MI USA
Stefan Heinemann, Fraunhofer USA, Inc., Center for Laser Technology; Plymouth MI USA
Thomas Eisenbeis, Fraunhofer USA, Inc., Center for Laser Technology; Plymoth MI USA
Presented at ICALEO 2010
Pulse parameter optimization is a ...$28.00
ICALEO 2010 Paper #M1103 (Concept and Realization of a High-Rate Laser Drilling Process Reaching for Ten Thousand Holes Per Second and Beyond)
Concept and Realization of a High-Rate Laser Drilling Process Reaching for Ten Thousand Holes Per Second and Beyond
Authors:
Alexander Olowinsky, PRESENTER NOT AUTHOR, Fraunhofer ILT; Aachen Germany
Malte Schulz-Ruhtenberg, Fraunhofer Institute for Laser Technology; Aachen Germany
Tobias Baier, Manz Automation AG; Reutlingen Germany
Ernst Wilhelm Boeckler, SCANLAB AG; Puchheim Germany
Christof Siebert, TRUMPF Laser- und Systemtechnik GmbH; Ditzingen Germany
Presented at ICALEO 2010
One major breakthrough on the way to cheap sustainable solar electricity generation is the back contact solar cell. One way to move the front contacts to the back s...$28.00
ICALEO 2010 Paper #M1105 (Picosecond Ablation of Silicon Nitride using 532 Nm Master Oscillator Fiber Power Amplifier for Patterning Polycrystalline Silicon Photovoltaic Cells)
Picosecond Ablation of Silicon Nitride using 532 Nm Master Oscillator Fiber Power Amplifier for Patterning Polycrystalline Silicon Photovoltaic Cells
Authors:
Brian Baird, Summit Photonics LLC; Lake Oswego OR USA
Tim Gerke, Fianium Ltd; Eugene OR USA
Presented at ICALEO 2010
Laser processing is integral to the manufacture of advanced photovoltaic cells, including crystalline silicon and thin film devices. Continuous improvement and innovation in laser processing methods and laser architectures are needed to further improve device efficiencies and reduce overall device manufacturing costs. In particular, patterning silicon nitride and silicon oxide on mono and polycrystalline sili...$28.00