ICALEO 2007 Paper #905 (Underwater Rock Drilling by CO2 Laser)
Underwater Rock Drilling by CO2 Laser
Authors:
Toshio Kobayashi, Japan Drilling Co.,Ltd; Tokyo Japan
Kiyonobu Ohtani, Tohoku University; Sendai Japan
Kazuyoshi Takayama, Tohoku University; Sendai Japan
Satoru Umezu, Japan Drilling Co., LTD.,; Tokyo Japan
Komei Okatsu, Japan Oil, Gas and Metals National Corporation; chiba Japan
Presented at ICALEO 2007
As a part of fundamental studies of drilling rocks by laser irradiation, this paper describes the evolution of a cavitation cone created by irradiation of pulsed carbon dioxide laser into water. A carbon dioxide laser beam was intermittently irradiated onto a granite specimen submerged at 50mm de...$28.00
ICALEO 2007 Paper #906 (Laser Assisted Machining of Commercially Pure Titanium)
Laser Assisted Machining of Commercially Pure Titanium
Authors:
Shoujin Sun, Swinburne University of Technology; Melbourne Australia
James Harris, Swinburne University of Technology; Melbourne Australia
Yvonne Durandet , Swinburne University of Technology; Melbourne Australia
Milan Brandt, Swinburne University of Technology; Melbourne Australia
Presented at ICALEO 2007
Laser assisted machining (LAM) has been performed on commercially pure titanium bar. Cutting forces have been measured with a 3-component force sensor, and tool temperature has been measured with thermocouples on the flank face. Both the scale and fluctuation of cutting forces were dramatica...$28.00
ICALEO 2007 Paper #M1001 (Advanced Precision Laser Marking and Other Microelectronics Applications Including Wafer Dicing, PCB Drilling/Trimming and ITO Trimming using Industrial Nano-Second Lasers (Invited Paper - 40 Minute Presentation))
Advanced Precision Laser Marking and Other Microelectronics Applications Including Wafer Dicing, PCB Drilling/Trimming and ITO Trimming using Industrial Nano-Second Lasers (Invited Paper - 40 Minute Presentation)
Authors:
Sangyoung Park, EO Technics; Anyang South Korea
Nam Seong Kim, EO Technics; Anyang South Korea
Seonghoon Kim, EO Technics; Anyang South Korea
Wonchul Jung, EO Technics; Anyang South Korea
Wangkyu Lim, EO Technics; Anyang Singapore
Presented at ICALEO 2007
Marking on semiconductor devices becomes complicated and difficult because ultra-reduction of the device size is being made to increase the memory capacity and processor...$28.00
ICALEO 2007 Paper #M1003 (Spatial-confinement Effects in Laser-induced Breakdown Spectroscopy)
Spatial-confinement Effects in Laser-induced Breakdown Spectroscopy
Authors:
X.K. Shen, University of Nebraska - Lincoln; Lincoln NE USA
J. Sun, University of Nebraska - Lincoln; Lincoln NE USA
Yongfeng Lu, University of Nebraska - Lincoln; Lincoln NE USA
Presented at ICALEO 2007
The spatial confinement effects in laser-induced breakdown of aluminum (Al) targets in air have been investigated both by optical emission spectroscopy and fast photography. KrF excimer laser pulses with a pulse duration of 23 ns and a wavelength of 248 nm were used to produce plasmas from Al targets. Al atomic emission lines show an obvious enhancement in the intensity of optical emission whe...$28.00
ICALEO 2007 Paper #M1004 (Micro Drilling with Nd:YAG Lasers in the Nanosecond Regime)
Micro Drilling with Nd:YAG Lasers in the Nanosecond Regime
Authors:
Reiner Witte, Lasag AG; Thun Switzerland
Rene Liebers, Lasag AG; Thun Switzerland
Tobias Moser, Lasag AG; Thun Switzerland
Presented at ICALEO 2007
Drilling with Lasers has come a long way since Theodore Maiman reported the first working laser some forty Years ago. New laser sources and specially developed processes are entering the market to move the mere drilling to the next level of micro drilling. Surgical needles in the medical field, turbine blades for the aviation industry, and gas filter for the automotive industry are just some examples that come to mind here. Nevertheless, the market asks ...$28.00
ICALEO 2007 Paper #M1005 (Multi-Oxides Thin Film Formation on Iron-Base Metal by YVO4 Pulsed Laser Color Marking)
Multi-Oxides Thin Film Formation on Iron-Base Metal by YVO4 Pulsed Laser Color Marking
Authors:
Hiroyuki Niino, Natl Inst Adv Ind Sci & Technol (AIST); Tsukuba Japan
Seisuke Kano, Natl Inst Adv Ind Sci & Technol (AIST); Tsukuba Japan
Tadatake Sato, Natl Inst Adv Ind Sci & Technol (AIST); Tsukuba Japan
Kaoru Itagaki, Itagaki Metals Co. Ltd; Sanjo Japan
Tomoyuki Togashi, Itagaki Metals Co. Ltd; Sanjo Japan
Hirofumi Shimura, Natl Inst Adv Ind Sci & Technol (AIST); Tsukuba Japan
Presented at ICALEO 2007
Laser marking is a useful technique to draw characters and patterns on metals as a monochromic color. Recently some researches report...$28.00
ICALEO 2007 Paper #M1006 (Microvia Drilling with a Green Laser)
Microvia Drilling with a Green Laser
Authors:
Chong Zhang, CREOL, University of Central Florida; Orlando FL USA
Nathaniel Quick, AppliCote Associates, LLC; Sanford FL USA
Aravinda Kar, CREOL, University of Central Florida; Orlando FL USA
Presented at ICALEO 2007
Microvias drilling in polymer-copper-polymer multilayer substrate for high density electronic packaging applications is studied in this paper. Frequency doubled Nd:YAG laser (532 nm) is used for the simulation and experiment. Numerical thermal model is built to simulate the drilling process. Volumetric heating and laser self defocusing due to drilling front profile are considered in the model. Due to the low ab...$28.00
ICALEO 2007 Paper #M101 (Femtosecond Laser Induced Structural Modifications in Lithium Niobate for Integrated Optical Applications (Invited Paper - 40 Minute Presentation))
Femtosecond Laser Induced Structural Modifications in Lithium Niobate for Integrated Optical Applications (Invited Paper - 40 Minute Presentation)
Authors:
Stefan Nolte, Friedrich-Schiller-University Jena; Jena Germany
Jens Thomas, Friedrich-Schiller-University Jena; Jena Germany
Jonas Burghoff, Friedrich-Schiller-University Jena; Jena Germany
Andreas Tünnermann, Friedrich-Schiller-University Jena; Jena Germany
Antonio Ancona, Friedrich-Schiller-University Jena; Jena Germany
Felix Dreisow, Friedrich-Schiller-University Jena; Jena Germany
Presented at ICALEO 2007
Within the past years the use of ultrashort laser pulses has foun...$28.00
ICALEO 2007 Paper #M102 (Via Hole Machining in Sapphire using an Ultrafast Laser)
Via Hole Machining in Sapphire using an Ultrafast Laser
Authors:
Nagaraj Batta, Panasonic Boston Lab; Cambridge MA USA
Shuichi Nagai, Panasonic Boston Lab; Cambridge MA USA
Ming Li, Panasonic Boston Lab; Cambridge MA USA
Presented at ICALEO 2007
GaN is expected to replace GaAs and Si materials in the next generation high power density Microwave Monolithic Integrated Circuits (MMIC), thanks to its excellent material characteristics. Sapphire is one of the most promising substrate materials for GaN-based MMIC for its excellent physical characteristics and cost effectiveness. Interconnects across MMIC devices are made possible by via holes through sapphire layer, which i...$28.00
ICALEO 2007 Paper #M103 (Femtosecond Laser Micro-Structuring of Materials in the NIR and UV Regime)
Femtosecond Laser Micro-Structuring of Materials in the NIR and UV Regime
Authors:
D. Liu, The University of Liverpool; Liverpool Great Britain
J. Cheng, The University of Liverpool; Liverpool Great Britain
Walter Perrie, The University of Liverpool; Liverpool Great Britain
A. Baum, The University of Manchester; Manchester Great Britain
Martin Sharp, The University of Liverpool; Liverpool Great Britain
P. Scully, The University of Manchester; Manchester Great Britain
Stuart Edwardson, The University of Liverpool; Liverpool Great Britain
N. Semaltianos, The University of Liverpool; Liverpool Great Britain
Z. Ku...$28.00