ICALEO 2013 Paper #1802 (Investigation on the Laser Welding Process of Tin Phosphor Bronze)
Investigation on the Laser Welding Process of Tin Phosphor Bronze
Authors:
Hui-chi Chen, Singapore Institute of Manufacturing Technology; Singapore Singapore
Guijun Bi, Singapore Institute of Manufacturing Technology; Singapore Singapore
Mui Ling Sharon Nai, Singapore Institute of Manufacturing Technology; Singapore Singapore
Jun Wei, Singapore Institute of Manufacturing Technology; Singapore Singapore
Presented at ICALEO 2013
Tin phosphor bronze is a tin-based copper alloy which is widely used in the electronics industry. It is being used in components such as computer and mobile connectors, lead frames, vibrating plates and terminals. Because of the high...$28.00
ICALEO 2013 Paper #1803 (Effect of Process Parameters on the Weld Quality in Laser Welding of Az31B Magnesium Alloy in Lap Joint Configuration)
Effect of Process Parameters on the Weld Quality in Laser Welding of Az31B Magnesium Alloy in Lap Joint Configuration
Authors:
Masoud Harooni, Southern Methodist University-RCAM; Dallas TX USA
Radovan Kovacevic, Southern Methodist University; Dallas TX
Blair Carlson, GM Research Center; Warren MI
Presented at ICALEO 2013
Magnesium is the lightest structural metal; therefore, it has been used in different industries such as automotive, aerospace, electronics and defense. Among different joining processes, laser welding is highly efficient due to its low heat input, high depth-to-width ratio and good mechanical properties. A fiber laser is used to weld AZ31B magnesiu...$28.00
ICALEO 2013 Paper #1804 (Laser Processing of Thin Copper and Aluminium Thin Sheets with Green (532Nm) and Infrared (1064Nm) Pulsed Laser Beam Sources)
Laser Processing of Thin Copper and Aluminium Thin Sheets with Green (532Nm) and Infrared (1064Nm) Pulsed Laser Beam Sources
Authors:
Paola De Bono, TWI Ltd; Cambridge USA
Ioannis Metsios, TWI Ltd; Cambridge Great Britain
Jonathan Blackburn, TWI Ltd; Cambridge Great Britain
Paul Hilton, TWI Ltd; Cambridge Great Britain
Presented at ICALEO 2013
In this study processing of thin copper C101 (Cu C101) and aluminium 3003 (Al 3003) were investigated, using both infrared (IR), at 1064nm wavelength, and green, at 532nm wavelength, pulsed laser beam sources. The power density (peak power divided by the area of the minimum focused laser beam width) thresholds for ke...$28.00
ICALEO 2013 Paper #1805 (Dissimilar Joining of Titanium Alloy Ti-6Al-4V to Aluminum Alloy 2024 Via Laser Welding)
Dissimilar Joining of Titanium Alloy Ti-6Al-4V to Aluminum Alloy 2024 Via Laser Welding
Authors:
Vittorio Alfieri, University of Salerno; Fisciano Italy
Fabrizia Caiazzo, University of Salerno; Fisciano Italy
Vincenzo Sergi, University of Salerno; Fisciano Italy
Presented at ICALEO 2013
Dissimilar joining of titanium to aluminum is required for several purposes in automotive and aerospace industries. Nevertheless, a number of issues arise due to their different properties, in terms of crystal micro structure, melting point, heat conductivity and coefficient of linear expansion. In addition, brittle intermetallic formation is induced at the interface, thus affecting the...$28.00
ICALEO 2013 Paper #1901 (High-Efficiency Laser Processing of CFRP)
High-Efficiency Laser Processing of CFRP
Authors:
Rudolf Weber, IFSW, University of Stuttgart; Stuttgart Germany
Volkher Onuseit, Ifsw, University of Stuttgart; Stuttgart
Simon Tscheulin, Ifsw, University of Stuttgart; Stuttgart
Thomas Graf, Ifsw, University of Stuttgart; Stuttgart
Markus Grafried, Ifsw, University of Stuttgart; Stuttgart
Presented at ICALEO 2013
Industrial large-volume application of CFRP requires efficient and high-quality processing. Laser processing of carbon fibres is very promising but highly energy consuming due to the large sublimation enthalpy of graphite. In contrast, the sublimation enthalpy of the embedding...$28.00
ICALEO 2013 Paper #1902 ( Dependence of Cutting Carbon Fiber Reinforced Plastics with nanosecond Laser On The Laser Wavelength and Oxygen Concentration of the Air.)
Dependence of Cutting Carbon Fiber Reinforced Plastics with nanosecond Laser On The Laser Wavelength and Oxygen Concentration of the Air.
Authors:
Shin-Ichiro Masuno, Osaka Univ.; Ibaraki,Osaka Pref. Japan
Kenjiro Takahashi, Osaka Univ.; Ibaraki, Osaka Japan
Yuji Sato, Osaka Univ.; Ibaraki, Osaka Japan
Masahiro Tsukamoto, Osaka Univ.; Ibaraki, Osaka Japan
Kazuya Miyagawa, Osaka Univ.; Ibaraki, Osaka Japan
Kazuki Nakai, Osaka Univ.; Ibaraki, Osaka Japan
Tatsuya Nariyama, Kinki Univ.; Higashiosaka, Osaka Japan
Presented at ICALEO 2013
Carbon fiber reinforced plastic(CFRP) is complex material made of carbon fibers and m...$28.00
ICALEO 2013 Paper #1903 (Macro-Structuring of Composite Material by UV-Laser Ablation)
Macro-Structuring of Composite Material by UV-Laser Ablation
Authors:
Hagen Dittmar, Laser Zentrum Hannover e.V.; Hannover Germany
Peter Jaeschke, Laser Zentrum Hannover E.V.; Hannover Germany
Oliver Suttmann, Laser Zentrum Hannover E.V.; Hannover Germany
Ludger Overmeyer, Laser Zentrum Hannover E.V.; Hannover Germany
Presented at ICALEO 2013
Composite materials like carbon fibre reinforced plastics (CFRP) or glass fibre reinforced plastics (GFRP) have been in use by the aviation and wind energy industry for years due to their lightweight benefits. With the automotive industry entering the CFRP market, the demand for a more economic CFRP production will in...$28.00
ICALEO 2013 Paper #1904 (Correlation of Interlaminar and Tensile Properties with Resulting Thermal Impact While CFRP Laser Processing)
Correlation of Interlaminar and Tensile Properties with Resulting Thermal Impact While CFRP Laser Processing
Authors:
Oliver Suttmann, Laser Zentrum Hannover E.V.; Hannover Germany
Peter Jaeschke, Laser Zentrum Hannover e.V.; Hannover USA
Heinz Haferkamp, Laser Zentrum Hannover E.V.; Hannover Germany
Presented at ICALEO 2013
Continuous carbon fibre reinforced composites (CFRP) are recognized as having a significant lightweight construction potential for a wide variety of industrial applications. However, a today‘s barrier for a comprehensive dissemination of CFRP structures is the lack of economic, quick and reliable manufacture processes, e.g. the cutting and tr...$28.00
ICALEO 2013 Paper #1905 (Investigations on Processing of Carbon Fiber Reinforced Plastics Using Ultrashort Pulsed Laser Radiation with High Average Power)
Investigations on Processing of Carbon Fiber Reinforced Plastics Using Ultrashort Pulsed Laser Radiation with High Average Power
Authors:
Johannes Finger, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
Marco Weinand, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
Dirk Wortmann, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
Presented at ICALEO 2013
Due to an outstanding ratio of strength to weight, carbon fiber reinforced plastics (CFRP) are a promising material for lightweight applications e.g. in aerospace and automotive industry. The main challenge for laser processing is the strong difference between the o...$28.00
ICALEO 2013 Paper #1906 (Investigations of Multi-Wavelengths Treatment at Composite Materials)
Investigations of Multi-Wavelengths Treatment at Composite Materials
Authors:
Annett Klotzbach, Fraunhofer IWS; Dresden Germany
Andreas Fuerst, Fraunhofer Iws Dresden; Dresden
Frank Kretzschmar, Fraunhofer Iws Dresden; Dresden Germany
Karsten Zenger, Fraunhofer Iws Dresden; Dresden Germany
Jan Hauptmann, Fraunhofer Iws Dresden; Dresden Germany
Eckhard Beyer, Fraunhofer Iws Dresden; Dresden Germany
Presented at ICALEO 2013
Composite materials are often characterized by anisotropic mechanical properties. But also the thermal and optical behavior is orientation dependent. The knowledge about these characteristics is important when ...$28.00