• PICALO 2008 Paper #1102 (A Statistical Model for Research on the Focal Position Effect on the Taper of Laser Drilling)

    A Statistical Model for Research on the Focal Position Effect on the Taper of Laser Drilling
    Authors:
    Yinzhou Yan, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Lingfei Ji, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yijian Jiang, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Yong Bao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at PICALO 2008

    The relationships between focal position and diameter or taper of holes drilled by CO2 ...

    $28.00

  • PICALO 2008 Paper #1104 (Topographic Analysis of Holes Drilled by Pulsed Nd:Yag Laser on Dd6 Single-Crystal Superalloy)

    Topographic Analysis of Holes Drilled by Pulsed Nd:Yag Laser on Dd6 Single-Crystal Superalloy
    Authors:
    Chen Changjun, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Zhang Min, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Zhang Shichang, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Laser Processing Research Center; Wuhan Peoples Republic of China
    Chang Qingming, Key Laboratory for Ferrous Metallurgy and Resources U...

    $28.00

  • PICALO 2008 Paper #1106 (Process Parameters Study of Closed-Loop Laser Rapid Forming)

    Process Parameters Study of Closed-Loop Laser Rapid Forming
    Authors:
    Jun Yu, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\'An Peoples Republic of China
    Hua Tan, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\\'An Peoples Republic of China
    Jing Chen, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\\'An Peoples Republic of China
    Xin Lin, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University; Xi\'An Peoples Republic of China
    Weidong Huang, State Key Laboratory of Solidification Processing, Nor...

    $28.00

  • PICALO 2008 Paper #1107 (The Study on the Laser Compound Forming of Sheet Metal)

    The Study on the Laser Compound Forming of Sheet Metal
    Authors:
    Jianzhong Zhou, Jiangsu University; Zhenjiang Peoples Republic of China
    YiBin Chen, Jiangsu University; Zhenjiang Peoples Republic of China
    Shu Huang, Jiangsu University ; Zhenjiang Peoples Republic of China
    Li Xiao, Jiangsu University ; Zhenjiang Peoples Republic of China
    Yueqing Sun, Jiangsu University ; Zhenjiang Peoples Republic of China
    Presented at PICALO 2008

    Laser compound formingLCF of sheet metal is an advanced forming process without dies and other external forces. It combines the advantages of the laser thermal-stress forming (LTF) and laser peen forming (LPF). T...

    $28.00

  • PICALO 2008 Paper #1108 (Laser Peening of 7050 Aluminum Alloy with Fastener Holes)

    Laser Peening of 7050 Aluminum Alloy with Fastener Holes
    Authors:
    Zou Shikun, BAMTRI; Beijing Peoples Republic of China
    Ziwen Cao, Beijing Aeronautical Manufacturing Technology Research Institute ; Beijing Peoples Republic of China
    Shuili Gong, Beijing Aeronautical Manufacturing Technology Research Institute ; Beijing Peoples Republic of China
    Presented at PICALO 2008

    In order to develop the application of laser shock processing (LSP) as a strengthening technology for 7050 aluminum alloy fasten holes, the fatigue properties of laser shock-processed aluminum alloy specimens were investigated. At first, we characterized and compared the dislocation density and surface r...

    $28.00

  • PICALO 2008 Paper #1201 (Improving Physical Properties of Functional Materials by Laser Irradiation (Invited Paper))

    Improving Physical Properties of Functional Materials by Laser Irradiation (Invited Paper)
    Authors:
    Yijian Jiang, Institiute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Lingfei Ji, Beijing University of Technology ; Beijing Peoples Republic of China
    Presented at PICALO 2008

    In this presentation, progress on improving physical properties of functional materials by laser irradiation is reported and discussed. After laser irradiation, some physical properties, such as dielectric, electrical conductivity, piezoelectric, magnetic, transparency, and photoluminescence properties, can be found to be enhanced in some crystals, ceramics, or thin...

    $28.00

  • PICALO 2008 Paper #1203 (Recent Developments of the Laser-Assisted Cold Spray Process and Deposit Characterisation)

    Recent Developments of the Laser-Assisted Cold Spray Process and Deposit Characterisation
    Authors:
    Matthew Bray, University of Cambridge; Cambridge Great Britain
    Andrew Cockburn, University of Cambridge; Cambridge Great Britain
    William O'Neill, University of Cambridge; Cambridge Great Britain
    Presented at PICALO 2008

    Laser-assisted Cold Spray (LCS) is a new coating and fabrication process which combines the supersonic powder beam found in Cold Spray (CS) with laser heating of the deposition zone. LCS retains the advantages of CS; solid-state deposition, high build rate and the ability to deposit onto a range of substrates, while reducing operating costs by removing th...

    $28.00

  • PICALO 2008 Paper #1204 (Mechanism Analysis on Dry-Friction Abrasive Wear Resistance of Particulate Reinforced Mmc Coatings by Laser Deposition for Corrugated Rollers)

    Mechanism Analysis on Dry-Friction Abrasive Wear Resistance of Particulate Reinforced Mmc Coatings by Laser Deposition for Corrugated Rollers
    Authors:
    Zhaoyong Qian, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
    Wenjin Liu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Mingxing Ma, Tsinghua University; Beijing Peoples Republic of China
    Chaofeng Wu, Tsinghua University; Beijing Peoples Republic of China
    Dongye Zhang, Tsinghua University; Beijing Peoples Republic of China
    Presented at PICALO 2...

    $28.00

  • PICALO 2008 Paper #1205 (Metal Matrix Nano H-Bn Self-Lubricating Composite Coating Synthesized by Nd:Yag Laser Cladding)

    Metal Matrix Nano H-Bn Self-Lubricating Composite Coating Synthesized by Nd:Yag Laser Cladding
    Authors:
    A.H. Wang, Huazhong University of Science and Technology; Wuhan Peoples Republic of China
    X.L. Zhang, Huazhong University of Science and Technology ; Wuhan Peoples Republic of China
    X.F. Zhang, Huazhong University of Science and Technology ; Wuhan Peoples Republic of China
    X.W. Xiong, Huazhong University of Science and Technology ; Wuhan Peoples Republic of China
    H.G. Xu, Huazhong University of Science and Technology ; Wuhan Peoples Republic of China
    C.S Xie, Huazhong University of Science and Technology ; Wuhan Peoples Republic of China<...

    $28.00

  • PICALO 2008 Paper #1207 (Laser Melt Injection of Monocrystalline WC Particles into Ti-6Al-4V)

    Laser Melt Injection of Monocrystalline WC Particles into Ti-6Al-4V
    Authors:
    Dejian Liu, Harbin Institute of Technology; Harbin Peoples Republic of China
    Fuquan Li, Harbin Institute of Technology; Harbin Peoples Republic of China
    Liqun Li, Harbin Institute of Technology; Harbin Peoples Republic of China
    Yanbin Chen, Harbin Institute of Technology; Harbin Peoples Republic of China
    Presented at PICALO 2008

    The laser melt injection (LMI) process was explored to produce WC particles (WCp) reinforced Ti-6Al-4V metal matrix composites (MMCs). In particular the high strength monocrystalline WC particles was used as injection particles to avoid the intercrysta...

    $28.00

Pages

There is currently no content classified with this term.