Product Code: JLA_16_2_85

Authors:
Aart Schoonderbeek
Array

Cornelis A. Biesheuvel
Ramon M. Hofstra
Nederlands Centrum voor Laser Research (NCLR) B.V., P.O. Box 2662, Enschede, The Netherlands

Klaus-J. Boller
Johan Meijer
Array

Laser parameters, which significantly influence laser-material interaction processes, are the wavelength, the energy, and the power density. Additionally, there are parameters, like the pulse length, which also strongly influence processing speed and quality. Studies where different types of lasers have been used indicate that long pulses are beneficial for processing speed. However, when different types of laser systems are used to study the effect of the pulse length, a direct comparison of the results is difficult because the use of different lasers involves a simultaneous variation of other parameters (e.g., wavelength) as well. In this study a technique of pulse length variation is used in which the pulse length is the only varied parameter and thus enables the desired direct comparison. Pulses with different lengths are sliced out of pulses of a long pulse XeCl excimer laser, keeping all other laser parameters unchanged. Results are shown of hole drilling experiments in 125 μm nickel, 25 μm aluminum, and 125 μm aluminum foil with pulse lengths between 9 and 150 ns. The influence of the pulse length on material processing is discussed in connection with energy and power of the pulses. The experiments show that both for pulses with the same energy and the same power long pulses remove more material than short pulses and, moreover, long pulses can yield higher quality of the drilled holes. © 2004 Laser Institute of America.