CLOSURE NOTICE: Our office will be closed from October 14 - 19, 2018 in support of our annual ICALEO Conference. Placed orders will be fulfilled on Friday, October 19. If you need assistance, please contact us here as staff will be checking these communications regularly.

Thank you for your understanding.

  • ICALEO 2013 Paper #2009 (Microstructure of Mcraly Coatings on Steel Substrates)

    Microstructure of Mcraly Coatings on Steel Substrates
    Authors:
    Armando Yanez, Universidade da Coruna; Ferrol Spain
    Jose M. Amado, Universidade Da CoruñA; Ferrol Spain
    Vicente Amigo, Universidad PolitéCnica De Valencia; Valencia Spain
    MaríA J. Tobar, Universidade Da CoruñA; Ferrol Spain
    Javier N. Montero, Universidade Da CoruñA; Ferrol Spain
    Presented at ICALEO 2013

    MCrAlY alloys (where M stands for Ni,Co or both) are commonly used as overlay protective coatings in gas turbine engine components against high temperature oxidation and corrosion. The protective effect of these alloys is due to the formation of a continuous thermally stable ox...

    $28.00

  • ICALEO 2013 Paper #2008 (System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems)

    System Identification and Height Control of Laser Cladding Using Adaptive Neuro-Fuzzy Inference Systems
    Authors:
    Mohammad Farshidianfar, University of Waterloo; Waterloo USA
    Amir Khajepour, University of Waterloo; Waterloo ON Canada
    Meysar Zeinali, University of Laurentian; Sudbury ON Canada
    Adrian Gerlich, University of Waterloo; Waterloo ON Canada
    Presented at ICALEO 2013

    Laser cladding is an emerging technology which has recently received a significant attention by researchers due to its promising manufacturing features. A complicated object can be fabricated directly from a CAD model by means of a layer-by-layer manufacturing using this technique. In m...

    $28.00

  • ICALEO 2013 Paper #2006 (The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process)

    The Effect of Minor Alloying Elements of Alloy 625 on the Laser Cladding Process
    Authors:
    Jonne Nakki, Tampere University of Technology; Kokkola Finland
    Henri Pajukoski, Tampere University of Technology; Tampere Finland
    Jari Tuominen, Tampere University of Technology; Tampere Finland
    Petri Vuoristo, Tampere University of Technology; Tampere Finland
    Presented at ICALEO 2013

    Hot cracking sensitivity of some commercially available alloy 625 powders in laser cladding has been studied. Based on the previous studies on total of 11 powders from different manufacturers, some follow-up tests with powders that had varying amounts of additional alloying or impurity e...

    $28.00

  • ICALEO 2013 Paper #2002 (Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80)

    Microstructure Control During Laser Deposition of Nickel-Based Superalloy Ds Rene80
    Authors:
    Heng Zhao, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Dongyun Zhang, Beijing University of Technology; BeiJing USA
    Zhibo Li, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Xuanyang Cao, Institute of Laser Engineering, Beijing University of Technonogy; Beijing Peoples Republic of China
    Tiechuan Zuo, Institute of Laser Engineering, Beijing University of Technology; Beijing Peoples Republic of China
    Presented at ICALEO 2013

    Rene 80 is a nickel-bas...

    $28.00

  • ICALEO 2013 Paper #2001 (Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability)

    Laser Cladding Using Scanning Optics - Effect of the Powder Feeding Angle and Gas Flow on Process Stability
    Authors:
    Joonas Pekkarinen, Lappeenranta University of Technology; Turku Finland
    Antti Salminen, Lappeenranta University of Technology; Lappeenranta Finland
    Veli Kujanpaaa, Vtt Technical Research Centre of Finland; Lappeenranta Finland
    Jarmo Ilonen, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
    Lasse Lensu, Lappeenranta University of Technology, Machine Vision and Pattern Recognition Laboratory (MVPR); Lappeenranta Finland
    Heikki Kalviainen, Lappeenranta University of Te...

    $28.00

  • ICALEO 2013 Paper #1909 (The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint)

    The Damage Characteristics and Mechanism of Cfrp during Laser Joining of Cfrp/Mild Steel Dissimilar Joint
    Authors:
    Xianghu Tan, Tsinghua University; Beijing Peoples Republic of China
    Zhang Jing, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
    Shan Jiguo, Tsinghua University; Beijing Peoples Republic of China
    Shanglu Yang, General Motors(China) Investment Company Limited; Shanghai Peoples Republic of China
    Ren Jialie, Tsinghua University; Beijing Peoples Republic of China
    Presented at ICALEO 2013

    The reliable joining of carbon fiber reinforced polymer (CFRP) and metal is the key problem to its widespread ...

    $28.00

  • ICALEO 2013 Paper #1908 (Optimization of Laser Parameters for Structural Bonding of CFRP Components with Paste Adhesive)

    Optimization of Laser Parameters for Structural Bonding of CFRP Components with Paste Adhesive
    Authors:
    Deniz Ozel, Turkish Aerospace Industries, Inc.; Ankara Turkey
    Lale Sacan, Turkish Aerospace Industries, Inc.; Ankara
    Basak Basarir, Turkish Aerospace Industries, Inc.; Ankara
    Ayhan Kilic, Turkish Aerospace Industries, Inc.; Ankara
    Aysun Dogangun Akin, Turkish Aerospace Industries, Inc.; Ankara
    Presented at ICALEO 2013

    Carbon fiber reinforced polymer composites (CFRPs) are finding increasing usage in many industrial sectors, including aerospace industry. Adhesive bonding is often the most attractive joining technique for these materia...

    $28.00

  • ICALEO 2013 Paper #1907 (Study of Carbon-Fiber-Reinforced-Polymer Under Moderate Laser Intensity. Application to Laser Drilling.)

    Study of Carbon-Fiber-Reinforced-Polymer Under Moderate Laser Intensity. Application to Laser Drilling.
    Authors:
    Frederic Coste , Cnrs/Pimm; Paris France
    Frederic Vales, Cnrs/Pimm; Paris France
    Laurent Berthe, CNRS - Arts et Metiers/Lab PIMM; Paris France
    Presented at ICALEO 2013

    Carbon-fiber-reinforced polymers are increasingly used especially in structural parts for new aircraft. However, laser machining is not well implemented for cutting or drilling because significant collaterals effects remain. In this paper, we propose a study of laser-matter interaction at moderate flows (

    $28.00

  • ICALEO 2013 Paper #1906 (Investigations of Multi-Wavelengths Treatment at Composite Materials)

    Investigations of Multi-Wavelengths Treatment at Composite Materials
    Authors:
    Annett Klotzbach, Fraunhofer IWS; Dresden Germany
    Andreas Fuerst, Fraunhofer Iws Dresden; Dresden
    Frank Kretzschmar, Fraunhofer Iws Dresden; Dresden Germany
    Karsten Zenger, Fraunhofer Iws Dresden; Dresden Germany
    Jan Hauptmann, Fraunhofer Iws Dresden; Dresden Germany
    Eckhard Beyer, Fraunhofer Iws Dresden; Dresden Germany
    Presented at ICALEO 2013

    Composite materials are often characterized by anisotropic mechanical properties. But also the thermal and optical behavior is orientation dependent. The knowledge about these characteristics is important when ...

    $28.00

  • ICALEO 2013 Paper #1905 (Investigations on Processing of Carbon Fiber Reinforced Plastics Using Ultrashort Pulsed Laser Radiation with High Average Power)

    Investigations on Processing of Carbon Fiber Reinforced Plastics Using Ultrashort Pulsed Laser Radiation with High Average Power
    Authors:
    Johannes Finger, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
    Marco Weinand, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
    Dirk Wortmann, Chair for Laser Technology, Rwth Aachen University; Aachen Germany
    Presented at ICALEO 2013

    Due to an outstanding ratio of strength to weight, carbon fiber reinforced plastics (CFRP) are a promising material for lightweight applications e.g. in aerospace and automotive industry. The main challenge for laser processing is the strong difference between the o...

    $28.00

Pages

help desk software

There is currently no content classified with this term.