• PICALO 2008 Paper #M102 (Processing of Polymer and Organic Materials using Tunable Ultrafast Mid-Infrared Lasers (Invited Paper))

    Processing of Polymer and Organic Materials using Tunable Ultrafast Mid-Infrared Lasers (Invited Paper)
    Authors:
    Richard Haglund, Vanderbilt University; Nashville TN USA
    Nicole Dygert, Vanderbilt University ; Nashville TN USA
    Stephen Johnson, Vanderbilt University ; Nashville TN USA
    Kenneth Schriver, Vanderbilt University ; Nashville TN USA
    Hee Park, Appliflex Llc; Mountain View CA USA
    Presented at PICALO 2008

    The principal vibrational modes of many polymers and organic materials of interest for electronic and electro-optic applications lie in the mid-infrared region of the spectrum between 2 and 10 µm. Most of these bands are shown in Figu...

    $28.00

  • PICALO 2008 Paper #M105 (Direct Measurement of Temperature Distribution in Silicon by Ultrashort Laser Pulses)

    Direct Measurement of Temperature Distribution in Silicon by Ultrashort Laser Pulses
    Authors:
    Hong Yu Zheng, Singapore Institute of Manufacturing Technology; Singapore Singapore
    Y.C. Lam, Nanyang University ; Singapore Singapore
    Presented at PICALO 2008

    Femtosecond (fs) laser has been demonstrated as a high precision micromachining tool for materials processing because of its advantages of reduced thermal damage to the concerned substrate compared to long-pulsed lasers. It is often believed that most of the absorbed laser energy is carried away by the ablated material, leaving negligible amounts of thermal energy dissipated into the bulk of the remaining material. In contrast, pr...

    $28.00

  • PICALO 2008 Paper #M1101 (Laser Fabrication of Nanoparticles and Crystals in Solution (Invited Paper))

    Laser Fabrication of Nanoparticles and Crystals in Solution (Invited Paper)
    Authors:
    Hiroshi Masuhara, Osaka University; Chuo-Ku, Kobe Japan
    Teruki Sugiyama, Hamano Foundation, Center for Advanced Science and Innovation ; Osaka Japan
    Hiroki Takeuchi, Osaka University ; Osaka Japan
    Tsuyoshi Asahi, Osaka University ; Osaka Japan
    Hiroshi Yoshikawa, Osaka University ; Osaka Japan
    Yoichiroh Hosokawa, Osaka University ; Osaka Japan
    Presented at PICALO 2008

    Focusing femtosecnd lasser pulse or intense CW YAG laser, we have suceeded in fabricating small nanoparticles, and organic and protein crystals. Under such intense laser irradiation, ...

    $28.00

  • PICALO 2008 Paper #M1102 (Fabrication of Nanomaterials by Laser Irradiation in Liquid Phase (Invited Paper))

    Fabrication of Nanomaterials by Laser Irradiation in Liquid Phase (Invited Paper)
    Authors:
    Naoto Koshizaki, National Institute of Advanced Industrial Science and Technology (AIST); Tsukuba Japan
    Takeshi Sasaki, National Institute of Advanced Industrial Science and Technology (Aist); Tsukuba Japan
    Presented at PICALO 2008

    We have been working on a nanoparticle fabrication technique by irradiating laser light onto a plate placed or powder dispersed in liquid media. This technique has several advantages over conventional nanoparticle preparation in liquid phase; highly pure nanoparticles with less use of surfactant molecules mostly toxic in biological systems, and crystallized nanopar...

    $28.00

  • PICALO 2008 Paper #M1103 (Flash Lamp Curing of Nano-Particulates for Passive Device Fabrication (Invited Paper))

    Flash Lamp Curing of Nano-Particulates for Passive Device Fabrication (Invited Paper)
    Authors:
    James Sears, South Dakota School of Mines & Technology; Rapid City SD USA
    Jeffery West, South Dakota School of Mines & Technology; Rapid City SD USA
    Michael Carter, South Dakota School of Mines & Technology; Rapid City SD USA
    Presented at PICALO 2008

    Photonic Curing is being developed to cure or sinter metal nano-particle based films by exposing them to a brief, intense pulse of light from a xenon flash lamp. This photonic curing technology allows for rapid and selective heating that fuses nano-scale metallic ink particles into functional components. This technology allows th...

    $28.00

  • PICALO 2008 Paper #M1201 (Aligned Growth of Zno Nanowires by Laser Ablation and Their Applications (Invited Paper))

    Aligned Growth of Zno Nanowires by Laser Ablation and Their Applications (Invited Paper)
    Authors:
    Tatsuo Okada, Kyushu University; Fukuoka Japan
    Jun Nishimura, Kyushu University; Kukuoka Japan
    Ruiqian Guo, Fudan University ; Shanghai Peoples Republic of China
    Masato Matsumoto, Kyushu University; Fukuoka Japan
    D. Nakamura, Kyushu University; Fukuoka Japan
    M. Higashihata, Kyushu University; Fukuoka Japan
    Presented at PICALO 2008

    I am going to present our recent progress in the syntesis of ZnO nanowires by nanoparticle assisted pulsed laser deposition, and their possible applications to optelectronic devices.

    $28.00

  • PICALO 2008 Paper #M1202 (Laser Micro Adjustment Technology - Possibilities and Challenges for Novel Applications (Invited Paper))

    Laser Micro Adjustment Technology – Possibilities and Challenges for Novel Applications (Invited Paper)
    Authors:
    Michael Schmidt, Bayerisches Laserzentrum GmbH; Erlangen Germany
    P. Bechtold, Bayerisches; Erlangen Germany
    Presented at PICALO 2008

    In the field of micro technology highest accuracies in terms of position, angles and distances are of particular importance. It is becoming increasingly expensive and difficult to directly position and fix critical components to each other for two reasons: on the one hand, the dimensions and thus the tolerances get smaller due to ongoing miniaturisation and on the other hand, the number of integrated functional components is rising consta...

    $28.00

  • PICALO 2008 Paper #M1203 (Fabrication of Carbon Nanotube Interconnections by Current-assisted Laser Irradiation)

    Fabrication of Carbon Nanotube Interconnections by Current-assisted Laser Irradiation
    Authors:
    Tao Gong, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Yong Zhang, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Chaofeng Wu, Tsinghua University; Beijing Peoples Republic of China
    Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
    Wenjin Liu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Jinquan Wei, Tsinghua University; Beijing Peoples Republic of China
    Yi Jia, Tsinghua University; Beijing Peoples Re...

    $28.00

  • PICALO 2008 Paper #M1204 (Improving Optical Transmittance of Double Walled Carbon Nanotube Film by Laser Processing)

    Improving Optical Transmittance of Double Walled Carbon Nanotube Film by Laser Processing
    Authors:
    Tao Gong, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Yong Zhang, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Minlin Zhong, Tsinghua University; Beijing Peoples Republic of China
    Wenjin Liu, Tsinghua University, Dept of Mechanical Engineering; Beijing Peoples Republic of China
    Yi Jia, Tsinghua University; Beijing Peoples Republic of China
    Chaofeng Wu, Tsinghua University; Beijing Peoples Republic of China
    Kunlin Wang, Tsinghua University; Beijing Peoples...

    $28.00

  • PICALO 2008 Paper #M1205 (Fabrication of Micro-Machine Elements by Five-Axis Laser Processing System)

    Fabrication of Micro-Machine Elements by Five-Axis Laser Processing System
    Authors:
    Souta Matsusaka, Chiba University; Chiba Japan
    Kensuke Iijima, Chiba University; Chiba Japan
    Takehiro Watanabe, Chiba University; Chiba USA
    Youhei Mizoguchi, Chiba University ; Chiba Japan
    Presented at PICALO 2008

    Laser micro-processing system, which consisted of five-axis automatic stage controlled with PC and UV nanosecond laser oscillator was developed. This system enabled both of milling and lathe processing by arrangement of the stages. Micro-windmills with multiple blades, micro-cylindrical cantilevers, micro-screw and micro-bevel gear were fabricated on polyimide fi...

    $28.00

Pages

There is currently no content classified with this term.