• ICALEO 2013 Paper #901 (A Study of High Power Fiber-Laser-TIG-Hybrid Welding of Low Alloyed Steel)

    A Study of High Power Fiber-Laser-TIG-Hybrid Welding of Low Alloyed Steel
    Authors:
    Antti Salminen, Lappeenranta University of Technology; Lappeenranta Finland
    Seppo Leppanen, La; Imatra Finland
    Presented at ICALEO 2013

    The use of laser welding is enlarging to new applications partly via various technological advancements. These include development of lasers and laser system components together with development in process techniques. The first studied and reported of so called laser-hybrid welding processes was laser-TIG-hybrid welding. This process has advantages over the laser-MIG-hybrid process due to the fact that wire feeding and arc parameters can really be controlled separate...

    $28.00

  • ICALEO 2013 Paper #902 (Induction Assisted Gma-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steels)

    Induction Assisted Gma-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steels
    Authors:
    Rabi Lahdo, Laser Zentrum Hannover e.V.; Braunschweig USA
    Oliver Seffer, Laser Zentrum Hannover E.V.; Hannover Germany
    Andre Springer, Laser Zentrum Hannover E.V.; Hannover Germany
    Stefan Kaierle, Laser Zentrum Hannover E.V.; Hannover Germany
    Ludger Overmeyer, Laser Zentrum Hannover E.V.; Hanover Germany
    Mareike Collmann, Institut FüR Stahlbau; Hannover Germany
    Peter Schaumann, Institut FüR Stahlbau; Hannover Germany
    JöRg Neumeyer, Institut FüR Elektroprozesstechnik; Hannover Germany
    Holger Schulbe, Institut ...

    $28.00

  • ICALEO 2013 Paper #904 (Hybrid Laser Welding of Cladded Tubes.)

    Hybrid Laser Welding of Cladded Tubes.
    Authors:
    Frederic Coste, PIMM-UMR 8006; Paris France
    Presented at ICALEO 2013

    The use of cladded pipe-lines with an inner layer of stainless steel or Nickel base alloys tends to increase for deep offshore pipe line applications. End users and certification code generally ask for conventional welding. This ensures an optimum quality on the inner side of the root pass and preserves the anti-corrosion property of the inner clad. However, this is obtained with a small thickness of the first pass and a low welding speed. Laser hybrid welding seems to be an attractive technique for increasing both the thickness of the root pass and the welding speed. Combinati...

    $28.00

  • ICALEO 2013 Paper #905 (Hybrid Laser Welding of Single Sided Fully Penetrated Fillet Welds)

    Hybrid Laser Welding of Single Sided Fully Penetrated Fillet Welds
    Authors:
    Wojciech Suder, Cranfield University; Cranfield Great Britain
    Josef Camilleri, Cranfield University; Cranfield Great Britain
    Stewart Williams, Cranfield University; Cranfield Great Britain
    Presented at ICALEO 2013

    Fillet welds are inherent part of large structures in shipbuilding industry, where distortion is a major issue. Hybrid laser welding enables fully penetrated fillet welds to be achieved with a lower energy than arc-based welding processes. This has significant effect on increase of productivity, decrease of distortion and reduction of weight. To achieve defects-free welds with good fa...

    $28.00

  • ICALEO 2013 Paper #906 (Study of Filler Metal Mixing and Its Implication on Weld Homogeneity of Laser-Hybrid and Laser Cold-Wire Welded Thick Austenitic Stainless Steel Joints)

    Study of Filler Metal Mixing and Its Implication on Weld Homogeneity of Laser-Hybrid and Laser Cold-Wire Welded Thick Austenitic Stainless Steel Joints
    Authors:
    Miikka Karhu, VTT Technical Research Centre of Finland; Lappeenranta Finland
    Veli Kujanpaaa, Vtt Technical Research Centre of Finland; Lappeenranta Finland
    Andrey Gumenyuk, Bam - Federal Institute for Materials Research and Testing, Berlin, Germany; Berlin Germany
    Marco Lammers, Bam - Federal Institute for Materials Research and Testing, Berlin, Germany; Berlin Germany
    Presented at ICALEO 2013

    Austenitic stainless steel AISI 316L grade base material with butt joint thicknesses of 10-15 mm and diffe...

    $28.00

  • ICALEO 2013 Paper #C103 (Additive Manufacturing In Micro Scale)

    Additive Manufacturing In Micro Scale
    Authors:
    Christian Noelke, Laser Zentrum Hannover e.V.; Hannover Germany
    Matthias Gieseke, Laser Zentrum Hannover e.V.; Hannover Germany
    Stefan Kaierle, Laser Zentrum Hannover e.V.; Hannover Germany
    Presented at ICALEO 2013

    Additive manufacturing is getting increasingly attractive for industrial production of unique or small series parts. Since a lot industrial metals like titanium and aluminum are established in AM processes, increasing the resolution within these processes is the next challenge. The aim is not only the production of micro-sized parts or important details, there is also a request to achieve ready to use surface qu...

    $28.00

  • ICALEO 2013 Paper #M1001 (Comparison Between Laser Technologies and Alternative Processes on Paint and Polymer Layer Removal on Composite Substrate)

    Comparison Between Laser Technologies and Alternative Processes on Paint and Polymer Layer Removal on Composite Substrate
    Authors:
    Charly Loumena, Alphanov; Talence France
    Anthony Kirsch, Alphanov; Talence France
    Rainer Kling, Alphanov; Talence Cedex France
    Presented at ICALEO 2013

    The application of composites and in particular CFRP (Carbon Fiber Reinforced Polymer) is a booming market. This material tends to gradually replace metals and alloys in many fields such as automotive, renewable energies, and aerospace. Indeed, composite materials combine high mechanical performances, low weight and good corrosion resistance. However this highly technical material requires ...

    $28.00

  • ICALEO 2013 Paper #M1002 (Experimental Investigation of Cfrp Ablation with Uv and N-Ir Nanosecond Lasers)

    Experimental Investigation of Cfrp Ablation with Uv and N-Ir Nanosecond Lasers
    Authors:
    Yuji Sato, Joining and Welding Reserach Institute, Osaka University; Osaka Japan
    Masahiro Tsukamoto, Joining and Welding Reserach Institute, Osaka University; Osaka Japan
    Kenjiro Takahashi, Joining and Welding Reserach Institute, Osaka University; Osaka Japan
    Shin-Ichiro Masuno, Joining and Welding Reserach Institute, Osaka University; Osaka Japan
    Kazuki Nakai, Joining and Welding Reserach Institute, Osaka University; Osaka Japan
    Tatsuya Nariyama, Kinki University; Osaka
    Hitoshi Nakano, Kinki University; Osaka Japan
    Presented at ICALEO 20...

    $28.00

  • ICALEO 2013 Paper #M1004 (From Fs - Ns: Influence of the Pulse Duration Onto the Material Removal Rate and Machining Quality for Metals)

    From Fs – Ns: Influence of the Pulse Duration Onto the Material Removal Rate and Machining Quality for Metals
    Authors:
    Benjamin Lauer, Bern University of Applied Sciences Engineering and Information Technology; Burgdorf Switzerland
    Beat Jaeggi, Bern University of Applied Sciences Engineering and Information Technology; Burgdorf Switzerland
    Marc Schmid, Bern University of Applied Sciences Engineering and Information Technology; Burgdorf Switzerland
    Beat Neuenschwander, Bern University of Applied Sciences; Burgdorf Switzerland
    Presented at ICALEO 2013

    When high requirements concerning machining quality are demanded, ultra short laser pulses from a few 100f...

    $28.00

  • ICALEO 2013 Paper #M1005 (Large Angle of Bragg Diffraction Using Interference Of Acoustic Wave Inside Acousto-Optic Deflector)

    Large Angle of Bragg Diffraction Using Interference Of Acoustic Wave Inside Acousto-Optic Deflector
    Authors:
    Tiansi Wang, Creol, the College of Optics & Photonics, University of Central Florida, University of Central Florida; Orlando FL USA
    Chong Zhang, Intel - Assembly & Test Technology Development; Chandler AZ USA
    Islam Salama, Intel - Assembly & Test Technology Development; Chandler AZ USA
    Aleksandar Aleksov, Intel Components Research; Chandler AZ USA
    Aravinda Kar, Mechanical and Aeronautical Eng., and Mat. Sci. and Eng. Department, University of Central Florida; Orlando FL USA
    Presented at ICALEO 2013

    Abstract

    The laser beam is ofte...

    $28.00

Pages

Pages