Technical Paper Presentations

Share Ideas, Discover Breakthroughs

help desk software

Program subject to change

TechnologyIndustryDetails
Nanomanufacturing
Microelectronics
Two-photon polymerization of blended resin mixtures for 3D nanofabrication of functional structures

Presented By: Yongfeng Lu

Nanomanufacturing
Microelectronics
Highly Sensitive Flexible Sensor Development by Selective Digital Laser Sintering of Nanomaterials

Presented By: Seung Hwan Ko

Laser Additive Manufacturing
Aerospace
A Novel Local Shielding Approach for the Laser Welding Based Additive Manufacturing of Large Structural Space Components from Titanium

Presented By: Frank Brueckner

Laser Additive Manufacturing
Aerospace
Potential and challenges of Additive Manufacturing for topology optimized spacecraft structures

Presented By: Robin Willner

Laser Additive Manufacturing
Aerospace
Selective Laser Melting of Inconel 625 alloy with reduced defect formation

Presented By: Maciej Mazur

Laser Additive Manufacturing
Aerospace
Powder Based Laser Material Deposition on Edges

Presented By: Stefanie Linnenbrink

Laser Additive Manufacturing
Aerospace
Analysis of different build-up strategies using Direct Laser Metal Deposition

Presented By: Marco Mazzarisi

Laser Additive Manufacturing
Aerospace
Influence of Fill Depth on Tensile Performance of 300M High Strength Steel following Laser Metal Deposition Repair

Presented By: Cameron Barr

Laser Additive Manufacturing
Automotive
The Effect of Deposited Strategy on the Epitaxial Growth of Inconel 718 During Laser Melting Deposition

Presented By: Nannan Lu

Laser Additive Manufacturing
Aerospace
Reduction of Porosity by Coupling with Electromagnetic Field During Laser Additive Remanufacturing of Nickel-based Superalloys

Presented By: Juehui Li

Laser Additive Manufacturing
Aerospace
Effect of Pre Hot Corrosion on Tensile Behavior of Laser Repaired Inconel 718 Alloy

Presented By: Jie Zhang

Laser Additive Manufacturing
Aerospace
Effect of N Content on Microstructure and Mechanical Properties of Selective Laser Melting of HR-2 Hydrogen Embrittlement Resistance Stainless Steels

Presented By: Xianfeng Shen

Laser Additive Manufacturing
Aerospace
Investigation on the Formation of Grain Boundary Serrations in Additively Manufactured Superalloy Haynes 230

Presented By: Frank Brueckner

Laser Additive Manufacturing
Aerospace
Microstructure formation of Ti-6Al-4V in synchronous induction assisted laser forming

Presented By: Wei Fan

Laser Additive Manufacturing
Aerospace
Microstructure Stability of Inconel 718 in the Laser Powder Bed Fusion Process as a Function of Geometrical Features and Process Parameters

Presented By: Kyle Snyder

Laser Additive Manufacturing
Aerospace
Microstructure control of the as-solidified and post-heat treated IN939 superalloy fabricated by laser cladding

Presented By: Yuan Chen

Laser Additive Manufacturing
Aerospace
Image-Based Algorithm for Nozzle Adhesion Detection at Powder-Fed Directed-Energy Deposition

Presented By: Christian Kledwig

Laser Additive Manufacturing
Aerospace
A Comparative Study Between the Laser-Based and the Arc-Based Additive Manufacturing

Presented By: Junmyoung Jang

Laser Additive Manufacturing
Aerospace
Influence of Laser Beam Profile on Selective Laser Meting Process of AlSi10Mg

Presented By: Tim Marten Wischeropp

Laser Additive Manufacturing
Aerospace
Comparison of Dimensional Accuracy and Form Deviations of Powder bed based and Nozzle based Additive Manufacturing Processes

Presented By: Samira Gruber

Laser Additive Manufacturing
Aerospace
Hybrid Additive Manufacturing (AM) for Large Format Blade Applications

Presented By: Peter Coutts

Laser Additive Manufacturing
Aerospace
Mechanical properties of Inconel 718 samples generated by Laser Material Deposition with coaxial wire feed

Presented By: Jana Kelbassa

Laser Additive Manufacturing
Aerospace
Assessing the sensitivity of laser powder bed fusion process towards laser characteristics through meso-scale process modelling

Presented By: Sankhya Mohanty

Laser Additive Manufacturing
Aerospace
In-situ qualification for mechanical properties of additively manufactured parts

Presented By: Yuri Plotnikov

Laser Additive Manufacturing
Aerospace
Dynamic Characterization of High-power Laser for Additive Manufacturing Applications.

Presented By: Dieter De Baere

Laser Additive Manufacturing
Aerospace
Real-time Porosity Diagnosis for Laser Additive Manufacturing of Aluminum Alloy Using Optical Emission Spectroscopy

Presented By: Wenjing Ren

Laser Additive Manufacturing
Aerospace
Comparison of SLOT and µCT Investigation of 3D printed Polymer Parts for Quality Assurance

Presented By: Gerrit Hohenhoff

Laser Additive Manufacturing
Aerospace
Effect of Laser Power on Microstructure and Properties of the Co-Based Composite Coatings on Titanium Alloy by Laser Cladding

Presented By: Kaiming Wang

Laser Additive Manufacturing
Aerospace
Effect of Sc and Zr Additions on Microstructure and Mechanical Properties of Selective Laser Melted Al-Zn-Mg-Cu Alloy

Presented By: Jiang BI

Laser Additive Manufacturing
Aerospace
High Entropy Alloys generated with Laser Cladding

Presented By: Maria Manuel Barbosa

Laser Additive Manufacturing
Aerospace
High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting

Presented By: Zhen Tan

Laser Additive Manufacturing
Aerospace
High deposition rate coaxial wire fed optical system

Presented By: Jacob Hay

Laser Additive Manufacturing
Aerospace
The Effects of Gravity on Laser Wire Out of Position Deposition in Additive Manufacturing

Presented By: Shariq Akhtar

Laser Additive Manufacturing
Aerospace
LMD-Powder Head: Design, Manufacturing and Validation

Presented By: Gabriel Fraga

Laser Additive Manufacturing
Aerospace
Laser Processing of Aluminum Eutectic Alloys for Improved Properties

Presented By: Metin KAYITMAZBATIR

Laser Additive Manufacturing
Aerospace
Experimental Study on Microstructural Evolution, Mechanical Properties and Electrochemical Behaviour of Additive Manufactured Ti-6Al-4V Alloy.

Presented By: OLAWALE FATOBA

Macroprocessing
Aerospace
Effect of Laser Focal Point Position in Penetration Depth and Profile when Welding Through Flux

Presented By: Kari Lahti

Macroprocessing
Aerospace
Direct Observation of Keyhole and Melt Flow in Fiber Laser Welding Under Reduced Ambient Pressure

Presented By: Meng Jiang

Macroprocessing
Aerospace
OCT seam tracking with beam oscillation

Presented By: Jan-Patrick Hermani

Macroprocessing
Aerospace
Real-Time Prediction of Quality Characteristics in Laser Beam Welding Using Optical Coherence Tomography and Machine Learning

Presented By: Christian Stadter

Macroprocessing
Aerospace
A theoretical study of influence of electromagnetic stirring on transport phenomena in wire feed laser beam welding

Presented By: Xiangmeng Meng

Macroprocessing
Aerospace
Analytical Description of the Hot Cracking Susceptibility of Laser Beam Welds in Aluminum Alloys

Presented By: Christian Hagenlocher

Macroprocessing
Aerospace
Numerical Weld Pool Simulation for the Accuracy Improvement of Inline Weld Depth Measurement Based on Optical Coherence Tomography

Presented By: Maximilian Schmoeller

Macroprocessing
Aerospace
Laser Transmission Welding of Additive Manufactured Components

Presented By: Julian Kuklik

Macroprocessing
Aerospace
Short Pulsed Laser-Induced Grain Refining in Weld Metal During CW Laser Welding of 2024-T3 Aluminum Alloy

Presented By: Tomokazu Sano

Macroprocessing
Aerospace
Joining of Thermoplastic CFRP Laminates by Selective Heat Input During Laser Cutting

Presented By: Verena Wippo

Macroprocessing
Aerospace
Dry Laser Peening for Improving Fatigue Properties of Laser Welded 2024-T3 Aluminum Alloy using Femtosecond Laser Pulses

Presented By: Tomokazu Sano

Macroprocessing
Aerospace
Effective Supplying Method of Shielding Gas in Vertical-position Laser Welding of Pure Titanium

Presented By: Yasuhiro Okamoto

Macroprocessing
Aerospace
Freeform Beam Shaping with Multi-Plane Light Conversion for 1.07µm Ultra-High Throughput Laser-Based Material Macroprocessing

Presented By: Gwenn Pallier

Macroprocessing
Aerospace
Simplified Calibration of Laser Power Meters for Improved Measurement Accuracy Using Radiation Pressure and Calibrated Masses

Presented By: Paul Williams

Macroprocessing
Aerospace
High-Speed X-Ray Imaging of the Laser Cutting Process

Presented By: Jannik Lind

Macroprocessing
Aerospace
High Power Nanosecond Laser for Shock Peening Applications

Presented By: Eric Mottay

Macroprocessing
Aerospace
Laser Drilling of Thermal Barrier Coated Aerospace Component

Presented By: Sundar Marimuthu

Macroprocessing
Aerospace
Impact of Short Pulsed Laser Cleaning on Underlying Metal Surfaces

Presented By: Albert Leonhard Jung

Macroprocessing
Aerospace
Superior Crack Behavior of CFRP Processed with Nanosecond UV Laser Pulses

Presented By: Masahiro Moriyama

Macroprocessing
Aerospace
Emerging Laser Cleaning Applications using High Power High Energy Solid State Lasers

Presented By: Young Kwon

Nanomanufacturing
Aerospace
Picosecond laser-induced periodic surface structures on alloys in liquids

Presented By: Ruksan Nadarajah

Microprocessing
Aerospace
Modification effect of high repetition frequency pulse laser cleaning on the surface of TA15 titanium alloy

Presented By: Bowen Liu

Microprocessing
Aerospace
Synergistic effect of laser patterned micro-scale features and surface chemistry on superhydrophobic properties of Al 7075

Presented By: Jagdheesh Radhakrishnan

Macroprocessing
Aerospace
STUDY ON EFFECTS OF Al-Si COATING THICKNESS ON WELDED HPF STEEL JOINTS

Presented By: Xi Chen

Microprocessing
Aerospace
Online Determination of the Hole Depth During Pulsed Laser Drilling for Depth-Adapted Drilling Strategies

Presented By: Daniel Holder

Microprocessing
Aerospace
Laser Marking of 2D Patterns from DXF Files

Presented By: Mohamed BEY

Microprocessing
Aerospace
Investigation of Laser Beam Scanning Strategies for 100 W Nanosecond Pulsed Fibre Laser Engraving of Metals.

Presented By: Stephen Dondieu

Microprocessing
Aerospace
Drilling of Longitudinally Shaped Deep Micro Holes in Tool Steel Using Ultra-Short Laser Pulses

Presented By: Manuel Henn

Battery Systems & Energy Conversion
Aerospace
Laser Welding Components for Electric Vehicles with a High-Power Blue Laser System

Presented By: Mark Zediker

Program subject to change

TechnologyIndustryDetails
Laser Additive Manufacturing
Medical Devices & Life Sciences
Laser Additive Manufacturing of Strong and Ductile Ti6Al4V Alloy under Low Oxygen Atmosphere

Presented By: Jiangwei Liu

Laser Additive Manufacturing
Medical Devices & Life Sciences
Mechanical Properties and Deformation Behavior of Laser Additive Manufactured Ti6Al4V Alloy with Different Cellular Lattice Structures

Presented By: Jiangwei Liu

Laser Additive Manufacturing
Medical Devices & Life Sciences
Laser Polishing of Additively Manufactured Medical Implants

Presented By: Mark McDonald

Laser Additive Manufacturing
Medical Devices & Life Sciences
Laser Polishing of Additively Manufactured Ti-6Al-4V - Microstructure Evolution and Material Properties

Presented By: Juliana dos Santos Solheid

Laser Additive Manufacturing
Medical Devices & Life Sciences
Monitoring of porosity during additive manufacturing and laser welding

Presented By: Yung Shin

Laser Additive Manufacturing
Medical Devices & Life Sciences
AM Powder Safety

Presented By: Tom Huegel

Laser Additive Manufacturing
Medical Devices & Life Sciences
Modeling of process-microstructure relationships of additively manufactured parts via high fidelity physics models

Presented By: Yung Shin

Laser Additive Manufacturing
Medical Devices & Life Sciences
Normal Vector Distribution for the Analysis of Complex Laser-Generated Surfaces Involving Overhanging Features.

Presented By: Alexander Kaplan

Laser Additive Manufacturing
Medical Devices & Life Sciences
Dynamic laser absorptance measured in a geometrically characterized distribution of stainless steel powder

Presented By: Brian Simonds

Laser Additive Manufacturing
Medical Devices & Life Sciences
A Multi-Location Laser Beam Characterization Technique for Laser Powder Bed Fusion

Presented By: Paul Boulware

Laser Additive Manufacturing
Medical Devices & Life Sciences
The Effect of Addition of Trace Boron on the Microstructure and Mechanical Properties of Ti6Al4V Produced by Laser Directed Energy Deposition

Presented By: Aitang Xue

Laser Additive Manufacturing
Medical Devices & Life Sciences
Layer-wise Control of Selective Laser Melting by Means of Inline Melt Pool Area Measurements

Presented By: Ali Gökhan Demir

Battery Systems & Energy Conversion
Medical Devices & Life Sciences
Advances on Ultrashort Fiber Laser Processing

Presented By: Marco Mendes

Macroprocessing
Medical Devices & Life Sciences
Adjustable Mode Laser Welding Evaluation

Presented By: Stan Ream

Macroprocessing
Medical Devices & Life Sciences
Improvement of weld strength improvement via novel dual laser warm laser shock peening

Presented By: Yung Shin

Macroprocessing
Medical Devices & Life Sciences
Laser Processing Over a Large Area by Wavefront-Controlled Scanning

Presented By: Xinpeng Du

Macroprocessing
Medical Devices & Life Sciences
Laser sealing of dissimilar compostable materials for packaging applications

Presented By: Mehrshad Mehrpouya

Microprocessing
Medical Devices & Life Sciences
Investigation on fiber laser irradiation of polycarbonate

Presented By: Zhongke Wang

Microprocessing
Medical Devices & Life Sciences
Influences to the Incubation Factor in Ultra-Short Pulse Laser Ablation by Beam Shaping

Presented By: Marco Smarra

Microprocessing
Medical Devices & Life Sciences
Analysis of the Interaction Process During Laser Transmission Welding of Multilayer Polymer Films with Adapted Laser Wavelength by Numerical Simulation and Thermography

Presented By: Maximilian Brosda

Microprocessing
Medical Devices & Life Sciences
Laser Doping of Platinum for MRI Compatibility of Pace Maker Implants

Presented By: SHIVA GADAG

Microprocessing
Medical Devices & Life Sciences
Investigation of non-optical-contact glass welding with ultrafast laser

Presented By: Bin He

Microprocessing
Medical Devices & Life Sciences
Laser Marking and Coloration of Ti-6Al-4V with Ultra-short Pulses

Presented By: Norbert Ackerl

Microprocessing
Medical Devices & Life Sciences
Evaluation of laser cleaning of biofilm contamination on aluminum alloy

Presented By: Ze Tian

Microprocessing
Medical Devices & Life Sciences
Fabrication of Micro/Nano Fluidic Silicon Moulds by a Mix-and-Match Methodology

Presented By: Tamara Delgado

Microprocessing
Medical Devices & Life Sciences
Real-Time, ISO 11146-1 Compliant M-Squared Measurement System with Novel Ghost Suppression Technology

Presented By: Michael Scaggs

Microprocessing
Medical Devices & Life Sciences
Observation of Single Ultra-short Laser Pulse generated Periodic Surface Structures on Line-like Defects

Presented By: Norbert Ackerl

Microprocessing
Medical Devices & Life Sciences
Ultrafast laser processing of composite materials

Presented By: Tara Murphy

Microprocessing
Medical Devices & Life Sciences
Parametric Studies on CO2 Laser Incision of Woods for Chemical Preservative Treatment

Presented By: Subhasisa Nath

Nanomanufacturing
Medical Devices & Life Sciences
Micro-/Nano-Fabrication Using Bessel-Beam Activated Photopolymerization

Presented By: Xiaoming Yu

Nanomanufacturing
Medical Devices & Life Sciences
Fabrication of nanostructures by interference laser processing and beam shaping technique

Presented By: Yoshiki Nakata

Nanomanufacturing
Medical Devices & Life Sciences
Preparation of nanoparticles by laser process in liquid and their biomedical applications

Presented By: Hiroyuki Wada

Nanomanufacturing
Medical Devices & Life Sciences
Preparation of chloroaluminium phthalocyanine nanoparticles by laser ablation in liquid and their photoacoustic imaging

Presented By: Hiroyuki Wada

Nanomanufacturing
Medical Devices & Life Sciences
Centimeter-scale femtosecond laser 3D printing in polymer and glass

Presented By: WeI Chu

Nanomanufacturing
Medical Devices & Life Sciences
Applications on Surface Functionalization by Laser-Induced Periodic Surface Structures (LIPSS)

Presented By: Camilo Florian Baron

Nanomanufacturing
Medical Devices & Life Sciences
Recent Advancements in Femtosecond Laser-induced Fabrication of Pure 3D Proteinaceous Microstructures

Presented By: Daniela Serien

Nanomanufacturing
Medical Devices & Life Sciences
3D metal microprinting enabled by ultrashort laser fabricated glass molds and microfluidic electroless plating

Presented By: Jian Xu

Nanomanufacturing
Medical Devices & Life Sciences
A facile method to fabricate a novel 3D porous silicon/gold architecture for surface enhanced Raman scattering

Presented By: Ting Huang

Nanomanufacturing
Medical Devices & Life Sciences
Laser Additive Patterning for Biomedical Applications by Laser-Induced Transfer

Presented By: Aiko Narazaki

Nanomanufacturing
Medical Devices & Life Sciences
Advanced Materials for 3D Laser Lithography

Presented By: Eva Blasco

Nanomanufacturing
Medical Devices & Life Sciences
Laser-induced periodic surface structures on glass by ultrafast laser irradiation

Presented By: Xin Zhao

Nanomanufacturing
Medical Devices & Life Sciences
Precise 4D Printing of Functional Devices via Two-photon Hydrogelation

Presented By: Wei Xiong

Nanomanufacturing
Medical Devices & Life Sciences
Nanotextured Surfaces for Studying and Controlling Cellular Behavior

Presented By: John Fourkas

Nanomanufacturing
Medical Devices & Life Sciences
Augmented Craftsmanship': Femtosecond Lasers Coupled to Advanced Haptic Feedback Meet Artistic Expression

Presented By: Julien Gateau

Nanomanufacturing
Medical Devices & Life Sciences
Femtosecond lasers applications in micromechanics: from tunable non-linear resonators to new insights in fracture mechanics and beyond

Presented By: Yves Bellouard

Nanomanufacturing
Medical Devices & Life Sciences
In-Situ Monitoring of Femtosecond Laser-Induced Modifications in Dielectrics Using Digital Holographic Microscopy

Presented By: Olivier Bernard

Nanomanufacturing
Medical Devices & Life Sciences
Laser-driven Motors in Nonliquid Environments

Presented By: Min Qiu

Program subject to change

TechnologyIndustryDetails
Laser Additive Manufacturing
Microelectronics
Effect of heat-treatment process on the microstructure and mechanical behaviors of Cu-10Sn alloy made by selective laser melting

Presented By: Zengjie Wang

Laser Additive Manufacturing
Microelectronics
Laser Power Effect on Microstructure Evolution of Fe and Sn Alloy Processed by Directed Energy Deposition

Presented By: Milton Pereira

Laser Additive Manufacturing
Microelectronics
Laser wire cladding – how fine can we go?

Presented By: Maria Barbosa

Laser Additive Manufacturing
Microelectronics
Additive Manufacturing of Immiscible BCC-FCC Alloys

Presented By: Ethan Sprague

Laser Additive Manufacturing
Microelectronics
Single-Shot Laser Additive Manufacturing of Customizable Micro-Optics

Presented By: Salvatore Surdo

Battery Systems & Energy Conversion
Microelectronics
Processing of Li ion Battery Foils with ns Fiber Lasers

Presented By: Jack Gabzdyl

Macroprocessing
Microelectronics
Beam Shaping with Multi-Plane Light Conversion for Femtosecond Laser Material Microprocessing

Presented By: Gwenn Pallier

Nanomanufacturing
Microelectronics
Photopolymerization process using laser interference lithography

Presented By: Gediminas Raciukaitis

Nanomanufacturing
Microelectronics
Drilling nanoscale hole in optical materials with ultrashort Bessel beam and its applications

Presented By: Guanghua CHENG

Nanomanufacturing
Microelectronics
Uniform LIPSS on Titanium Irradiated by Two Color Double Pulse Beam of Femtosecond Laser

Presented By: Masaki Hashida

Nanomanufacturing
Microelectronics
Chemo-mechanical Polish Lithography: A Pathway to Low Loss Large Scale Photonic Integration on Lithium Niobate on Insulator

Presented By: Ya Cheng

Nanomanufacturing
Microelectronics
Fabrication of ZnO nano/micro particles by optical vortex pulse illumination

Presented By: Daisuke Nakamura

Nanomanufacturing
Microelectronics
Pulse Width Dependence of Heat Accumulation in Ultrashort Pulse Laser Processing

Presented By: Aiko Narazaki

Nanomanufacturing
Microelectronics
Confining Intense Laser-Matter Interaction for the Processing of Transparent Dielectrics

Presented By: Francois Courvoisier

Nanomanufacturing
Microelectronics
Process for scalable fabrication of low AC loss HTS conductors

Presented By: Joseph Prestigiacomo

Nanomanufacturing
Microelectronics
Exciton Ultrafast Dynamics at the 2D-TMD/Perovskite Nano-interface

Presented By: Aziz Boulesbaa

Nanomanufacturing
Microelectronics
Novel hierarchical micro/nanostructures created by femtosecond laser ablation of silicon in liquids

Presented By: Dongshi Zhang

Nanomanufacturing
Microelectronics
Laser-based Fabrication of Composite Structures in a Hydrogel

Presented By: Mitsuhiro Terakawa

Nanomanufacturing
Microelectronics
Unconventional nonlinear optical responses from doped graphene

Presented By: Weitao Liu

Nanomanufacturing
Microelectronics
Laser-induced Metal-oxide Conversion and Graphene Ablation for the Production of Metal-oxide Thin-film Transistors

Presented By: Maren Kasischke

Microprocessing
Microelectronics
High Quality Bessel Beam Generation through Reflective Axicon for Glass Microprocessing

Presented By: Gwenn Pallier

Microprocessing
Microelectronics
Parallel Processing with Dynamic Beam Shaping

Presented By: Eric Mottay

Microprocessing
Microelectronics
Laser Micro-Welding of AZ31 Magnesium Wires Using a Fiber Laser- a Preliminary Study

Presented By: Erika García-López

Microprocessing
Microelectronics
Study of beam characteristics on femtosecond laser trimming

Presented By: Sanghoon Ahn

Microprocessing
Microelectronics
Reducing of Heat-Affected Zone on Si(111) by a Pulse Laser Bessel Beam

Presented By: Erkan Demirci

Microprocessing
Microelectronics
Thermal Response of Bessel Beam-Heated Microdroplets Carrying Nanoparticles for Deposition

Presented By: Eduardo Castillo-Orozco

Microprocessing
Microelectronics
Ultrashort Pulse Beam Splitting: Frequency versus Energy

Presented By: Tony S. Lee

Microprocessing
Microelectronics
Parallelized Laser Writing with Acousto-Optofluidics

Presented By: Alessandro Zunino

Microprocessing
Microelectronics
Laser processing of dielectrics using spatiotemporally tuned ultrashort pulses

Presented By: Boyang Zhou

Microprocessing
Microelectronics
Hole Drilling Capabilities Using an Ultrafast Variable Pulse Duration Laser

Presented By: Nathan Mathew

Microprocessing
Microelectronics
Polarization-dependent Bulk Modification of SiO2 by a Femtosecond Laser with Pulse-front Tilt

Presented By: Cheng-Wei Wang

Microprocessing
Microelectronics
DUV laser processing of Ceramic Matrix composites (CMC) in the atmosphere

Presented By: Yasuhiro Kamba

Microprocessing
Microelectronics
Experimental Investigation and Numerical Modeling of Ultrafast Laser Processing in Copper with ~GHz Bursts

Presented By: Zhibin Lin

Microprocessing
Microelectronics
Optical Stamping by Ultrashort Laser Pulses in Combination with a SLM based Flexible Beam Shaper and a fully Synchronized Galvo Scanner

Presented By: Beat Neuenschwander

Microprocessing
Microelectronics
Hish Speed UV Processing with High Power Femtosecond Lasers

Presented By: Eric Mottay

Microprocessing
Microelectronics
Time-dependence of the thermal damage of the resin allows pulsed laser micro welding of printed circuit boards.

Presented By: Eveline Reinheimer

Microprocessing
Microelectronics
Absorption and temperature distribution during ultrafast laser microcutting of polymeric materials

Presented By: Arifur Rahaman

Microprocessing
Microelectronics
Flex printed circuit processing with industrial picosecond UV lasers

Presented By: Jim Bovatsek

Microprocessing
Microelectronics
An experimental investigation of quality in Co_2 laser cutting of SuS304 and Steel

Presented By: Youngjin Seo

Microprocessing
Microelectronics
GHz Processing with Femtosecond Pulses

Presented By: Eric Mottay

Microprocessing
Microelectronics
Laser Direct Assembly of ZnO Nanowires for Functional Device Fabrication

Presented By: Jing Long

Microprocessing
Microelectronics
DUV excimer laser processing for the micro via hole on semiconductor package

Presented By: Yasufumi Kawasuji

Microprocessing
Microelectronics
Three-Dimensional Writing Inside Silicon Using a 2-µm Picosecond Fiber Laser

Presented By: L Lavoute

Microprocessing
Microelectronics
High aspect ratio and high quality microchannels in fused silica by ultrafast laser drilling

Presented By: Xin Zhao

Microprocessing
Microelectronics
Anti-counterfeiting microstructures induced by ultrashort laser pulses

Presented By: Jing Qian

Microprocessing
Microelectronics
Laser Based Metallization using silver pastes

Presented By: Carlos Molpeceres

Microprocessing
Microelectronics
Effect of optical properties on laser heating of microdroplet nanosuspensions

Presented By: Tianyi Li

Program subject to change

TechnologyIndustryDetails
Battery Systems & Energy Conversion
Automotive
Laser Applications in Automotive Battery Powertrain Production

Presented By: LEONID LEV

Battery Systems & Energy Conversion
Automotive
KW-CLASS LASER WELDING WITH BEAM SOURCES IN THE VISIBLE WAVELENGTH AREA

Presented By: Tim Hesse

Battery Systems & Energy Conversion
Automotive
Short Pulse Laser Welding of Aluminum and Copper Alloys in Dissimilar Configuration

Presented By: Alessandro Ascari

Battery Systems & Energy Conversion
Automotive
Improving Fast-Charging Performance of Lithium-Ion Batteries through Laser Patterning

Presented By: Chenglin Yang

Battery Systems & Energy Conversion
Automotive
Pulsed Laser Synthesis of N-doped Metal Oxide Micro-nano Structures for Efficient Water Splitting

Presented By: Mingyong Cai

Battery Systems & Energy Conversion
Automotive
Performance-Boost for Lithium-Ion Batteries by Laser Structured 3D-Electrodes

Presented By: Jan Bernd Habedank

Laser Additive Manufacturing
Automotive
Recent Progress and Applications of Laser Hybrid Additive Remanufacturing

Presented By: Jie Zhang

Laser Additive Manufacturing
Automotive
Laser Powder Bed Fusion: Cost versus Physics

Presented By: Thierry Marchione

Laser Additive Manufacturing
Automotive
Defect Detection in Additive Manufacturing via a Toolpath Overlayed Melt-Pool-Temperature Tomography

Presented By: Robert Bernhard

Laser Additive Manufacturing
Automotive
Laser Metal Deposition Development for Industrial Adoption

Presented By: Grace Tay

Laser Additive Manufacturing
Automotive
The effect of pre-heat temperature on the microstructure and wear properties of Laser Additive manufactured Fe-28Cr-2.8C alloy

Presented By: Stephen Sun

Laser Additive Manufacturing
Automotive
Investigations on the Influence of adapted Metal-Based Alloys on the Process of Laser Beam Melting

Presented By: Andreas Wimmer

Laser Additive Manufacturing
Automotive
Additive Manufacturing of Self-lubricated In-situ SiC(p)/Al Composite

Presented By: James Chen

Laser Additive Manufacturing
Automotive
Spattering Effects during Selective Laser Melting

Presented By: Joerg Volpp

Laser Additive Manufacturing
Automotive
An Anti-vibration Composite with Laser Additive Manufactured Metal Matrix Designed Based on Bionic Woodpecker Skull Structures

Presented By: Chang’an Zhou

Laser Additive Manufacturing
Automotive
Development of Laser Metal Deposition Process for On-Site Nuclear Facility Repair

Presented By: Arkan Abdulkadir

Laser Additive Manufacturing
Automotive
The influence of Hartmann effect on the WC particles distribution adjustment in laser melt injection

Presented By: Liang Wang

Macroprocessing
Automotive
A Study on Effect of Beam Parameters on Keyhole Behavior and Resulting Weld Quality

Presented By: Anna Unt

Macroprocessing
Automotive
Advanced Beam Control Strategies in High Power Fiber Laser Processing

Presented By: Marco Mendes

Macroprocessing
Automotive
Improvement in Sheet Metal Cutting Speed and Quality with a High Power, Variable Mode Fibre Laser

Presented By: Paul Harrison

Macroprocessing
Automotive
The Comparative Investigation on Single Laser Beam and Dual Laser Beam for Lap Welding of Aluminum Alloy

Presented By: Lin Chen

Macroprocessing
Automotive
Process Adapted Beam Oscillation – Key Features for the Development of Efficient Laser Processes

Presented By: Jens Standfuss

Macroprocessing
Automotive
Inline Weld Imaging and Monitoring with Scanning Optics

Presented By: Christopher Galbraith

Macroprocessing
Automotive
Adjustable ring mode (ARM) fiber laser in welding of 304 stainless steel sheets in partially penetrated lap joint configurations

Presented By: Masoud Mohammadpour

Macroprocessing
Automotive
Comparative Analysis of the Potential of Novel High Power Beam Sources and State-of-the-art Lasers for Cutting Non-metals

Presented By: Alexander Mickan

Macroprocessing
Automotive
Influence of Welding Parameters on Electromagnetic Supported Degassing of Die-casted and Wrought Aluminum

Presented By: André Fritzsche

Macroprocessing
Automotive
Metal Processing with Programmable Fiber Lasers

Presented By: Ken Gross

Macroprocessing
Automotive
OCT in Laser Materials Processing – the solution that best suits customers needs?!

Presented By: Markus Kogel-Hollacher

Macroprocessing
Automotive
Laser Welding of Dissimilar Metal Combinations

Presented By: Travis Stempky

Macroprocessing
Automotive
Adaptive Close-Loop Penetration Depth Control for Remote Laser Welding of Aluminium Components

Presented By: Mikhail Sokolov

Macroprocessing
Automotive
Mathematical modeling of the geometrical differences between the weld end crater and the steady-state weld pool

Presented By: Antoni Artinov

Macroprocessing
Automotive
Dissimilar Material Combination in Laser Beam Welding – Reduction of Distortion and Residual Stress

Presented By: Simon Olschok

Macroprocessing
Automotive
A Method for Feature Selection of Penetration Status in Laser Keyhole Welding Based on Characteristic Time of Welding

Presented By: Penghui Zhao

Macroprocessing
Automotive
Lamé curves approximation for the assessment of the 3-D temperature distribution in keyhole mode welding processes

Presented By: Marcel Bachmann

Macroprocessing
Automotive
Microstructures from Wire-fed Laser Welding of High Strength Steel Grades

Presented By: Alexander Kaplan

Macroprocessing
Automotive
Coupled membrane-free Optical Microphone and Optical Coherence Tomography keyhole measurements for welding laser parameter determination and control

Presented By: Nicolas Authier

Macroprocessing
Automotive
Smart production - On the way to autonomous laser processing

Presented By: Ruediger Brockmann

Macroprocessing
Automotive
High speed continuous processing of CFRP with 3-kW CW single-mode fiber laser

Presented By: Yuya Takubo

Macroprocessing
Automotive
Investigation into Laser Refurbishment and Transformation Hardening of Cast Iron Forming Dies for the Automotive Industry

Presented By: Maritha Theron

Macroprocessing
Automotive
20KW LASER WELDING APPLIED ON THE ITER CORRECTION COIL CASE WELDING

Presented By: Chao Fang

Macroprocessing
Automotive
Effect of Weld Line Shape on Laser Welded Joint Strength of Automotive High Strength Steel Sheets

Presented By: Asato Hara

Macroprocessing
Automotive
Investigation of Gas Pore Formation at Welding of Copper Using Laser Light at 515 nm Wavelength

Presented By: Lukas Alter

Macroprocessing
Automotive
A Study of Influence Factors of Laser Tailor Welded Blanks in Formability for Medium Mn Steel Used in Automotive Industry

Presented By: Yang CAO

Macroprocessing
Automotive
The investigation of pores defect formation in the weld during the high speed laser welding based on numerical simulation

Presented By: Yuewei Ai

Macroprocessing
Automotive
Influence of laser wavelength on weld quality in bead-on-plate welding of pure copper with high intensity blue diode laser

Presented By: Eiji Hori

Macroprocessing
Automotive
Monitoring the Process Pores of Laser-MIG Hybrid Welding with Welding Spectral Information

Presented By: xin li

Macroprocessing
Automotive
On-line Quality Monitoring System for Multi-functional Laser-based Processing based on Embedded VIS and MWIR Computer Vision

Presented By: Eva Vaamonde

Macroprocessing
Automotive
Thermal-Hydraulic Modeling and Acoustic Correlation

Presented By: Vincent BRUYERE

Macroprocessing
Automotive
Heat Accumulation in Laser Oxygen Cutting of Thick Metal Plates

Presented By: Nikita Levichev

Macroprocessing
Automotive
Precise Laser Structures as a Tool to Understand Metal-Polymer Joints

Presented By: Dominic Woitun

Macroprocessing
Automotive
Comparision of 1um Materials for High Power Laser Processing

Presented By: Adam Argondizzo

Macroprocessing
Automotive
Investigation on the Melt Ejection and Burr Formation during Laser Fusion Cutting of Stainless Steel

Presented By: Stoyan Stoyanov

Macroprocessing
Automotive
Study on Surface Morphology and Resolidification Microstructure of Medium Thickness Stainless Steel Sheets using High Power Laser Cutting

Presented By: Chongjing Hu

Macroprocessing
Automotive
Microstructure and characteristics of laser cutting on cement-based materials

Presented By: Youngjin Seo

Macroprocessing
Automotive
High-Power Diode Laser Cladding up to 50 kW

Presented By: Sörn Ocylok

Microprocessing
Automotive
Selective surface activation induced by laser (SSAIL) – a method for electronic circuit traces fabrication using laser-assisted local electroless copper plating process

Presented By: Gediminas Raciukaitis

Microprocessing
Automotive
Experimental Research and Numerical Modeling of Picosecond Laser Based Edge Preparation of Cutting Tools

Presented By: Yiyun Kang

Microprocessing
Automotive
Comparison of Ultrafast Laser Processing Using 5-axis Trepanning, 2.5D, and 2D Galvo Scanning in Combination with a Cutting Nozzle

Presented By: Nathan Mathew

Microprocessing
Automotive
On the influence of TiB2, TiC and TiN hard particles on the microstructure of localized laser dispersed AISI D2 tool steel surfaces

Presented By: Felix Spranger

Microprocessing
Automotive
Development in dry metal forming - Structuring ta-C coated tools with Direct Laser Interference Patterning and ultra-short pulsed lasers to reduce friction and wear

Presented By: Theresa Jähnig

Microprocessing
Automotive
A Comprehensive Review on Laser Dressing and Structuring of Superhard Abrasive Grinding Wheels

Presented By: Bang Hu

Microprocessing
Automotive
A Comprehensive Review on Laser Conditioning and Structuring of Superhard Abrasive Grinding Wheels

Presented By: Bang Hu

Microprocessing
Aerospace
Ultrafast Laser Hybrid Fabrication of Hierarchical 3D Structures of Nanorods on Microcones for Superhydrophobic Surfaces with Excellent Cassie State Stability and Mechanical Durability

Presented By: Rui Pan

Presented By:

Presented By: